采用十六烷基三甲基溴化铵(CTAB)对锂皂石(Laponite)进行修饰,得到有机化锂皂石.采用聚丙烯接枝马来酸酐(PP-g-MAH)作为增容剂,制备了一种具有高抗弯模量和高断裂伸长率的聚丙烯/有机化锂皂石复合材料,考察了有机化锂皂石对复合材料性能的影响.结果表明,当有机化锂皂石的用量增加时,复合材料的弯曲模量增加,断裂伸长率则先增加后降低.当有机化锂皂石质量分数仅为1%时,复合材料弯曲模量达到1230 MPa,相比纯PP提高约35%;复合材料的断裂伸长率达到700%,相比于纯PP,提高约25%.扫描电子显微镜结果显示,有机化锂皂石在聚丙烯基体中分布均匀,粒径在0.5 μm~1μn之间,与聚丙烯基体结合良好.
参考文献
[1] | 于娜娜,朱江兰,乔钰,张丽坤.聚合物/层状硅酸盐纳米复合材料制备研究进展[J].化工中间体,2011(10):1-5. |
[2] | 廖立兵.我国矿物功能材料研究的新进展[J].硅酸盐学报,2011(09):1523-1530. |
[3] | S. Mosleh Shirazi;K. Janghorban .Investigation of physical and chemical properties of polypropylene hybrid nanocomposites[J].Materials & design,2012(Feb.):474-478. |
[4] | M.L.Lopez-Quintanilla;S.Sanchez-Valdes;L.F.Ramos de Valle .Preparation and mechanical properties of PP/PP-g-MA/Org-MMT nanocomposites with different MA content[J].Polymer bulletin,2006(3):385-393. |
[5] | Shikinaka, K.;Aizawa, K.;Fujii, N.;Osada, Y.;Tokita, M.;Watanabe, J.;Shigehara, K. .Flexible, transparent nanocomposite film with a large clay component and ordered structure obtained by a simple solution-casting method[J].Langmuir: The ACS Journal of Surfaces and Colloids,2010(15):12493-12495. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%