欢迎登录材料期刊网

材料期刊网

高级检索

以短炭纤维、炭粉、Si粉、树脂和粘结剂为原料,采用温压-原位反应法(WC-ISR)制备C/C-SiC制动材料,研究该材料的压缩性能及其破坏机理.结果表明:C/C-SiC制动材料的纵向压缩强度可达118.2 MPa,纵向压缩破坏表现为韧性断裂,以对角剪切破坏方式为主;横向压缩强度可达86.9 MPa,横向压缩破坏主要表现为脆性断裂,以多层复合剪切破坏方式为主.C/C-SiC制动材料的压缩性能分别随炭纤维和SiC含量的增加而增大,且炭纤维含量的影响更加显著;但随基体炭含量的增加而降低.

参考文献

[1] Walter Krenkel;Bernhard Heidenreich;Ralph Renz .C/C-SiC composites for advanced friction systems[J].Advanced Engineering Materials,2002(7):427-436.
[2] 肖鹏,熊翔,张红波,黄伯云.C/C-SiC陶瓷制动材料的研究现状与应用[J].中国有色金属学报,2005(05):667-674.
[3] Hussam Abu El-Hija;Walter Krenkel;Stefan Hugel .Development of C/C-SiC Brake Pads for High-Performance Elevators[J].International journal of applied ceramic technology,2005(2):105-113.
[4] 张立同,成来飞,徐永东.新型碳化硅陶瓷基复合材料的研究进展[J].航空制造技术,2003(01):24-32.
[5] Sakai M. .The pull-out and failure of a fiber bundle in a carbon fiber reinforced carbon matrix composite[J].Carbon: An International Journal Sponsored by the American Carbon Society,2000(15):2123-2131.
[6] 习年生,于志成,陶春虎.纤维增强复合材料的损伤特征及失效分析方法[J].航空材料学报,2000(02):55-63.
[7] Krenkel W;Berndt F .C/C-SiC composites for space applications and advanced friction systems[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):177-181.
[8] 肖鹏,熊翔,任芸芸.不同成分对C/C-SiC材料摩擦磨损行为的影响与机理[J].中国有色金属学报,2005(07):1040-1044.
[9] 张长瑞;陈朝辉;张凌 .先驱体转化法制备碳纤维增强碳化硅复合材料的研究[J].复合材料学报,1994,11(03):26-32.
[10] KYOTANI T;MORIYAMA H;TOMITA A .High temperature treatment of polyfurfuryl alcohol/graphite oxide intercalation compound[J].CARBON,1997,35(08):1185-1203.
[11] ANAND K;GUPTA V;DARTFORD D .Failure mechanisms of laminated carbon-carbon composites-Ⅱ:Under shear loads[J].Acta Metallurgica Et Materialia,1994,42(03):797-809.
[12] 熊翔,黄伯云,肖鹏,吴凤秋.准三维C/C复合材料的层间剪切性能及其断裂机理[J].中国有色金属学报,2004(11):1799-1803.
[13] MHLRATZER A .Production,properties and applications of ceramic matrix composites[J].C/Fiber DKG,1999,76(04):30-35.
[14] FITZER E .Future of carbon-carbon composites[J].Carbon,1987,25(02):163-190.
[15] SOHN K Y;OH S M;LEE J Y .Failure behavior of carbon/carbon composites prepared by chemical vapor deposition[J].Carbon,1988,26(02):157-162.
[16] GUPTA V;ANAND K;KUYSKA M .Failure mechanisms of laminated carbon-carbon composites-Ⅰ:Under uniaxial compression[J].Acta Metallurgica Et Materialia,1994,42(03):781-795.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%