基于枝晶生长的扩散界面模型，改进元胞自动机法，并结合有限差分法，综合考虑浓度场、温度场以及熔池形状，建立 Fe-0.04%C(质量分数)合金枝晶生长和溶质浓度分布模型。模拟单个等轴晶的生长形貌及枝晶尖端生长速度随时间的变化关系、多个等轴晶的生长形貌和溶质浓度分布、柱状晶的生长形貌和耦合温度场后的柱状晶?等轴晶转变过程，并与实验进行对比。结果表明：取向角对枝晶形貌有一定的影响；枝晶尖端生长速度随时间的延长最后趋于稳定；熔池形状影响柱状晶生长形貌；溶质主要富集在枝晶根部及晶界处。模拟结果与实验结果吻合较好。
Based on the diffusive interface model of dendritic growth, a new model of dendrite growth and solute concentration distribution of Fe-0.04%C (mass fraction) alloy was developed by the improved cellular automaton method, combined with the finite difference method, considered concentration field, temperature field and the shape of molten pool. This model simulated the growth morphologies of a single equiaxial crystal, the relationships between dendrite tip growth and time, multiple equiaxial crystals growth morphologies and solute concentration distribution, the growth of columnar crystal, columnar-to-equiaxed transition after coupling temperature field, and compared with the experimental results. The results indicate that the orientation angles have certain influence on dendrite morphologies, the dendrite tip growth rate tends to be stable with the extension of time in the end, the shape of molten pool influences the growth morphologies of columnar crystals, the solute concentrate in the dendrite roots and grain boundaries. The simulation results are in accord with the experimental ones well.
参考文献
| [1] | 周尧和;胡壮麒;介万奇.凝固技术[M].北京:机械工业出版社,1998:1-8. |
| [2] | RAMANI A;BECKERMANN C .Dendrite tip growth velocities of settling NH4Cl equiaxed crystals[J].Scripta Materialia,1997,36(06):633-638. |
| [3] | BECKERMANN C;LI Q;TONG X .Microstructure evolution in equiaxed dendritic growth[J].SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS,2001,2(01):117-126. |
| [4] | Li Q.;Beckermann C. .Modeling of free dendritic growth of succinonitrile-acetone alloys with thermosolutal melt convection[J].Journal of Crystal Growth,2002(1/3):482-498. |
| [5] | W.J.Boettinger;S.R.Coriell .Solidification microstructures: recent developments, future directions[J].Acta materialia,2000(1):43-70. |
| [6] | 丁恒敏 .铸造合金的微观组织模拟——几种方法关键技术的研究[D].华中科技大学,2005. |
| [7] | 占小红 .Ni-Cr二元合金焊接熔池枝晶生长模拟[D].哈尔滨工业大学,2008. |
| [8] | 袁训锋,丁雨田.相场法模拟强各向异性作用下二元合金枝晶生长[J].中国有色金属学报,2011(09):2216-2222. |
| [9] | Qin RS;Wallach ER;Thomson RC .A phase-field model for the solidification of multicomponent and multiphase alloys[J].Journal of Crystal Growth,2005(1/2):163-169. |
| [10] | 张航,许庆彦,史振学,柳百成.DD6高温合金定向凝固枝晶生长的数值模拟研究[J].金属学报,2014(03):345-354. |
| [11] | REUTHER K;RETTENMAYR M .Perspectives for cellular automata for the simulation of dendritic solidification-A review[J].Computation Materials Science,2014,95:213-220. |
| [12] | 张红伟,NAKAJIMA Keiji,王恩刚,赫冀成.Al-Si合金宏观偏析、凝固组织演变的元胞自动机-控制容积法耦合模拟[J].中国有色金属学报,2012(07):1883-1896. |
| [13] | 张林,王元明,张彩碚.M基耐热合金凝固过程的元胞自动机方法模拟[J].金属学报,2001(08):882-888. |
| [14] | 严卫东,杨爱民,刘汉武,刘林.K4169高温合金凝固晶粒组织的计算机模拟[J].特种铸造及有色合金,2002(04):26-28. |
| [15] | CANDIN C A;DESBIOLLES J L;RAPPA M .Three dimensional finite element-cellulare automation model for the prediction of solidification grain structures[J].Metallurgy Materials Transaction,1999,30(02):3153-3165. |
| [16] | 陈守东,陈敬超.铝双辊连续铸轧凝固微观组织的数值模拟[J].中国有色金属学报（英文版）,2012(06):1452-1456. |
| [17] | 黄安国,王永生,李志远.焊缝金属凝固元胞自动机模型的研究[J].焊接技术,2003(06):13-15. |
| [18] | 黄安国,余圣甫,李志远.焊缝金属凝固组织元胞自动机模拟[J].焊接学报,2008(04):45-48. |
| [19] | 占小红,魏艳红,马瑞.Al-Cu合金凝固枝晶生长的数值模拟[J].中国有色金属学报,2008(04):710-716. |
| [20] | 张敏,汪强,李继红,李琳.焊接熔池快速凝固过程的微观组织演化数值模拟[J].焊接学报,2013(07):1-4,28. |
| [21] | 武传松.焊接热过程与熔池形态[M].北京:机械工业出版社,2007:54-80. |
| [22] | RAPPAZ M;THEVOZ P H .Solute diffusion model for equiaxed dendritic growth:Analytical solution[J].ACTA METALLURGICA,1987,35(12):2929-2933. |
| [23] | THEVOZ P H;DESBIOLLES J L;RAPPAZ M .Modeling of equiaxed microstructure formation in casting[J].Metallurgical Transactions,1989,20(02):311-322. |
| [24] | 陈晋 .基于胞元自动机方法的凝固过程微观组织数值模拟[D].东南大学,2005. |
| [25] | 朱鸣芳,陈晋,孙国雄,洪俊杓.枝晶生长的数值模拟[J].金属学报,2005(06):583-587. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%