For many rapid or near-rapid solidification processes, the interracial heat transfer between the melt and the substrate is a key issue on the cooling and solidification rate of castings. For the purpose of controlling and adjusting of the interfacial thermal resistance, the effects of C/BN, Zn and organic coatings on the instantaneous interracial heat flux and the solidified structure of AISI304 stainless steel solidification on copper substrate have been investiga- ted by using an experimental simulator. The results show that C/BN coatings can improve the uniformity of heat flux and solidified structure; Zn coating can increase the heat flux and solidification rate in the growth stage of the solidified shell; organic coating will decrease the heat flux and the solidification rate and make re-melted structure on the surface of the solidified shell.
参考文献
| [1] | T.LOULOU;E.A.ARTYUKHIN;J.P.BARDON .ESTIMATION OF THERMAL CONTRACT RESISTANCE DURING THE FIRST STAGES OF METAL SOLIDIFICATION PROCESS: II-EXPERIMENTAL SETUP AND RESULTS[J].International Journal of Heat and Mass Transfer,1999(12):2129-2142. |
| [2] | Pedro G. Q. NETTO;Roberto P. TAVARES;Mihaiela ISAC .A Technique for the Evaluation of Instantaneous Heat Fluxes for the Horizontal Strip Casting of Aluminum Alloys[J].ISIJ International,2001(11):1340-1349. |
| [3] | Bouchard, D;Leboeuf, S;Nadeau, JP;Guthrie, RIL;Isac, M .Dynamic wetting and heat transfer at the initiation of aluminum solidification on copper substrates[J].Journal of Materials Science,2009(8):1923-1933. |
| [4] | G.-X. Wang;E.F.matthys .Expeimental determination of the interfacial heat transfer during cooling and solidification of molten metal droplets impacting on a metallic substrate: effect of roughness and superheat[J].International Journal of Heat and Mass Transfer,2002(25):4967-4981. |
| [5] | L.Strezov .Experimental Studies of Interfacial Heat Transfer and Initial Solidification Pertinent to Strip Casting[J].ISIJ International,1998(9):959-966. |
| [6] | Hidekazu TODOROKI;Natthapong PHINICHKA .Heat Transfer Behavior of Molten Iron and Nickel during the First 0.2 Seconds of Solidification[J].ISIJ International,2009(9):1347-1355. |
| [7] | Paolo Nolli;Alan W. Cramb;Dong-Kyun Choo .The Effect of Surface Oxide Films on Heat Transfer Behavior in the Strip Casting Process[J].AISE Steel Technology,2004(12):117-123. |
| [8] | Strezov L.;Herbertson J. .Mechanisms of Initial Melt/Substrate Heat Transfer Pertinent to Strip Casting[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2000(5):1023-1030. |
| [9] | A. HUNTER;M. FERRY .Texture Enhancement by Inoculation during Casting of Ferritic Stainless Steel Strip[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2002(5):1499-1507. |
| [10] | A.Girgensohn;A.R.Buchner .Twin roll strip casting of low carbon steels[J].Ironmaking & Steelmaking: Products and applications,2000(4):317-323. |
| [11] | 梁高飞,张卫,于艳,王成全,方园.薄带连铸Kiss点前界面热流模型与凝固过程[J].上海交通大学学报,2008(09):1401-1404,1409. |
| [12] | Y. Yu;A. W. Cramb;R. Heard .The effect of oxygen partial pressure on heat transfer and solidification[J].ISIJ International,2006(10):1427-1431. |
| [13] | MANJIN HA;JUTAE CHOI;SEONGIN JEONG .Analysis and Prevention of Microcracking Phenomenon Occurring during Strip Casting of an AISI 304 Stainless Steel[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2002(5):1487-1497. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%