研究了B元素对CSP流程生产的低碳Al镇静钢热轧钢带的组织及力学性能的影响,探讨了B元素在CSP流程中的析出规律及对AlN和MnS析出行为的影响.试验结果表明:B元素能够起到使钢带组织软化的作用.在连铸过程中B与N结合形成粗大的BN粒子,减少了钢中固溶氮的质量分数,抑制AlN细微颗粒的析出,减少了铁素体组织细晶强化及AlN析出强化的作用,从而降低了材料的强度.
参考文献
| [1] | Chunlin Bao;Yongtao Si;Rongjun Xu.The Products Characteristics in Baotou CSP Plant[J].Processdings:TSCR,2002:340-348. |
| [2] | Ceped L E;Rodriguezibabe J M;Urcola J J .Influence of Composition and Thermal History on the Dynamic Recrystallisation and Subsequent Hot Ductility of Mild Steels[J].ISIJ International,1993,33:799-806. |
| [3] | Manohar PA.;Chandra T.;Ferry M. .Five decades of the Zener equation [Review][J].ISIJ International,1998(9):913-924. |
| [4] | KANG Yong-lin;YU Hao;FU Jie et al.Morphology and Precipitation Kinetics of AlN in Hot Strip of Low Carbon Steel Produced by CSP[J].Materials Science and Engineering,2003,A351:265-271. |
| [5] | 刘清友,孙新军,陈红桔,梁小恺,董瀚,翁宇庆,李德刚,王雪莲,包春林,田荣彬.普通碳素钢在CSP连轧过程中的组织演变[J].钢铁,2003(07):12-15. |
| [6] | L.D.Frawley;R.Priestner .The effects of Ti and S in direct rolled thin slab cast low carbon steel[J].Materials Science Forum,1998(0):485-492. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%