利用车削试验研究了铜、硫元素对4Cr13不锈钢切削性能的影响,并用浸泡试验和极化曲线研究了铜、硫元素对4Cr13钢耐腐蚀性能的影响.研究结果表明:铜、硫元素均能提高4Cr13钢的切削性能,含铜4Cr13钢的切削性能达到了含硫4Cr13钢的切削水平.另外,铜元素还可提高4Cr13钢的耐腐蚀性能,而硫却致使4Cr13钢的耐腐蚀性能下降.
参考文献
| [1] | 李瀑.提高高硫易切削不锈钢热塑性的研究[J].上海金属,2001(03):16-19. |
| [2] | Kosa T.Metals Handbook[M].ASM,Metals Park,OH,1989 |
| [3] | XU Ming;LI Liu-he;LIU You-ruing et al.Mechanism of Mechanical Property Enhancement in Nitrogen and Titanium Implanted 321 Stainless Steel[J].Materials Science and Engineering,2006,425A:1. |
| [4] | Seung-Jae You;Yoon-Seok Choi;Jung-Gu Kim .Stress corrosion cracking properties of environmentally friendly unleaded brasses containing bismuth in Mattsson's solution[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):207-214. |
| [5] | Poulachon G.;Le Calvez C.;Lebrun JL.;Prunet V.;Jawahir IS.;Dessoly M. .An investigation of the influence of sulphide inclusions on tool-wear in high speed milling of tool steels[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2001(1):334-343. |
| [6] | 吴晓春;崔昆 .非调质塑料模具钢中易切削相的分析[J].钢铁研究学报,1997,9(06):23. |
| [7] | 娄德春;崔昆;吴晓春 .硫复合系易切钢中夹杂物与易切削机理的研究[J].机械工程材料,1996,20(05):27. |
| [8] | Brossia C S;Kelly R G .Occluded Solution Chemistry Control and the Role of Alloy Sulfur on the Initiation of Crevice Corrosion in Type 304ss[J].Corrosion Science,1998,40:1851. |
| [9] | 岳丽杰,王龙妹,徐成海,朴秀玉.Cu-P耐候钢中稀土对夹杂物和耐蚀性的影响[J].东北大学学报（自然科学版）,2004(12):1179-1182. |
| [10] | 王建民,陈学群,李国民,胡裕龙.低合金船体钢点蚀敏感性的研究[J].海军工程大学学报,2003(05):91-96. |
| [11] | Akasawa T;Sakurai H;Tannka T et al.Effects of FreeCutting Additives on the Machinability of Austenitic Stainless Steels[J].Journal of Materials Processing Technology,2003,143-144:66. |
| [12] | Frishberg I V;Kishkoparov N V;Zolotukhina L V et al.Effect of Ultrafine Powders in Lubricants on Performance of Friction pairs[J].Wear,2003,254:645. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%