采用Gleeblel500热模拟机在应变速率为0.001～10/s、温度为380～470℃、真应变为0～0.7的条件下,研究了实验合金的流变应力行为.结果表明:该合金热压缩变形时存在较明显的稳态流变特征,当ε<1/s时,流变应力开始随应变增加而增加,达到峰值后趋于平稳,呈动态回复特征;当ε≥1/s时,流变应力均出现了明显的峰值应力,为连续动态再结晶特征.带Zener-Hollomon参数的双曲正弦函数可描述合金高温变形时的流变应力,σ解析表达式中A、α和n值分别为5.952×108/s、0.021 MPa-1和5.397:热变形激活能Q为157.9kJ/mol.
参考文献
| [1] | J.R. Cho;W.B. Bae;W.J. Hwang .A study on the hot-deformation behavior and dynamic recrystallization of Al-5 wt. percent Mg alloy[J].Journal of Materials Processing Technology,2001(1/3):356-361. |
| [2] | Kentaro Ihara;Yasuhiro Miura .Dynamic recrystallization in Al-Mg-Sc alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2004(0):647-650. |
| [3] | Hui Zhang;Luoxing Li;Deng Yuan .Hot deformation behavior of the new Al-Mg-Si-Cu aluminum alloy during compression at elevated temperatures[J].Materials Characterization,2007(2):168-173. |
| [4] | MALAS J C;VENUGOPAL S;SESHACHARYULU T .Effect of microstructural complexity on the hot deformation behavior of aluminum alloy 2024[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,368(1-2):41-47. |
| [5] | Jeoung Han Kim;Jin Ho Kim;Jong Taek Yeom;Dong-Geun Lee;Su Gun Lim;Nho Kwang Park .Effect of scandium content on the hot extrusion of Al-Zn-Mg-(Sc) alloy[J].Journal of Materials Processing Technology,2007(0):635-639. |
| [6] | Sheppard T;Jackson A .Constitutive equations for use in prediction of flow stress during extrusion of aluminium alloys[J].Materials Science and Technology: MST: A publication of the Institute of Metals,1997(3):203-209. |
| [7] | Shi H;McLaren AJ;Sellars CM;Shahani R;Bolingbroke R .Constitutive equations for high temperature flow stress of aluminium alloys[J].Materials Science and Technology: MST: A publication of the Institute of Metals,1997(3):210-216. |
| [8] | 韩冬峰,郑子樵,蒋呐,李劲风.高强可焊2195铝-锂合金热压缩变形的流变应力[J].中国有色金属学报,2004(12):2090-2095. |
| [9] | POIRIER J P;关得林.晶体的高温塑性变形[M].大连:大连理工大学出版社,1989 |
| [10] | 沈键 .2091铝锂合金高温塑性变形行为研究[D].中南工业大学,1996. |
| [11] | JONAS J J;SELLARS C M;TEGART M W J .Strength and structure under hot-working conditions[J].International Metals Reviews,1969,14:1-24. |
| [12] | 吴文祥,孙德勤,曹春艳,王战锋,张辉.5083铝合金热压缩变流变应力行为[J].中国有色金属学报,2007(10):1667-1671. |
| [13] | SHEPPARD T;PARSON N C;ZAIDI M A .Dynamic recrystallization in Al-7Mg[J].Metal Science Journal,1983,17(10):481-490. |
| [14] | ZENER C;HOLLOMON J H .Effect of strain-rate upon the plastic flow of steel[J].Journal of Applied Physics,1944,15(01):22-32. |
| [15] | 林启权,张辉,彭大暑,林高用,王振球.5182铝合金热压缩变形流变应力[J].湘潭大学自然科学学报,2002(03):84-88. |
| [16] | 林高用,张辉,郭武超,彭大暑.7075铝合金热压缩变形流变应力[J].中国有色金属学报,2001(03):412-415. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%