通过试验得到了化学镀Ni-P-B合金镀液中反应物浓度、温度等因素与沉积速率间的对数关系曲线，分别确定上述各因素对应的动力学参数，建立了沉积速率的经验方程式，计算了Ni-P-B合金化学镀的反应活化能。
Logarithmic relationship curves between the deposition rate and the concentration of reactants and operation temperature were obtained by experiments. Reaction kinetic parameters were obtained from comparison of experimental results and kinetic equations. Experimental equation of deposition rate can provide theoretical reference for electroless Ni-P-B alloy.
参考文献
| [1] | 廖戎,景小明,岑贵俐,陈若军.化学镀镍磷合金的工艺研究[J].矿物岩石,2002(01):83-86. |
| [2] | 高维娜,朱文胜,孙凯,盛刚,张伟.化学镀Ni-P合金镀液稳定剂研究[J].腐蚀与防护,2007(05):263-265. |
| [3] | 李钒,张登君,李报厚,罗世民.六方BN微颗粒表面化学镀Ni及动力学模型[J].金属学报,2004(02):173-178. |
| [4] | 闫操,戴玉林,徐宏,侯峰,姚志燕.Fe粉表面化学镀Ni-P的热力学与动力学[J].化学工程,2011(01):73-76,97. |
| [5] | 李德高,张丽茹,曲彦平,王赫莹.化学镀Ni-B工艺的研究[J].沈阳工业大学学报,2000(02):100-103. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%