Effect of laser scanning speed on phase constitution,microstructure,microhardness and wear resistance of laser-cladding hard facing alloy Stellite 12 has been investigated by means of a cross-flow-type CO_2 laser of 1.5 kW.The laser-cladding layer on the alloy consists of ma- trix phase of suppersaturated solid solution γ(Co,Cr)and complex hexagonal carbide M_7C_3.Under certain condition,at higher laser scanning speed,the suppersaturated solubility of elements increases in γ(Co,Cr),and the precipitation of the complex carbtde M_7C_3 de- creases,so the microhardness increases and the wear resistance decreases.But at slower laser scanning speed,more complex carbide M_7C_3 may precipitate,and the wear resistance may be improved.Therefore,it is believed that the principal factor in improving wear resistance is the precipitation of carbide M_7C_3,while increment of microhardness is the suppersaturated solu- bility of elements in matrix phase γ(Co,Cr).
参考文献
| [1] | |
| [2] | |
| [3] | |
| [4] | |
| [5] |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%