通过测试分析了T800/环氧预浸料固化过程中性能参数的变化规律；针对热压罐工艺条件下复合材料整体化结构分阶段成型的特点,提出了一种基于应力传递的分阶段固化变形的有限元模拟方法;对于不同成型工艺的工型加筋壁板结构,将分阶段模拟得出的变形结果与测试结果进行了对比,并分析了成型工艺与变形量之间的关系.结果表明,本文中提出的模拟方法能够准确预报整体化结构的固化变形,变形与成型工艺密切相关,针对特定的结构与铺层,采用合理的工艺过程能够有效减小构件的固化变形.
参考文献
| [1] | Huang C K.Study on co-cured composite panels with bladeshaped stiffeners[J].Composites:Part A,2003,34(5):403-410. |
| [2] | 岳广全.整体化复合材料壁板结构固化变形模拟及控制方法研究[D].哈尔滨:哈尔滨工业大学,2010.Yue Guangquan.Study on simulation and control method of cure-induced deformation for integrated composite panel[D].Harbin:Harbin Institute of Technology,2010. |
| [3] | Dong Chensong.Process-induced deformation of composite Tstiffener structures[J].Composite Structure,2010,92 (7)1614-1619. |
| [4] | Dong Chensong.A parametric study on the process-induced deformation of composite T-stiffener structures[J].Composites:Part A,2010,41(4):515-520. |
| [5] | 李君,姚学锋,刘应华,等.复合材料T型整体化结构固化翘曲变形模拟[J].复合材料学报,2009,26(1):156-161.Li Jun,Yao Xuefeng,Liu Yinghua,et al.Simulation on curing warpage deformation of composite T-shaped integrated structure[J].Acta Materiae Compositae Sinica,2009,26(1):156-161. |
| [6] | Li Jun,Yao Xuefeng,Liu Yinghua,et al.Thermo-viscoelastic analysis of the integrated T-shaped composite structure[J].Composites Science and Technology,2010,70(10):1497-1503. |
| [7] | Ersoy N,Garstka T,Potter K,et al.Modelling of the spring-in phenomenon in curved parts made of a thermosetting composite[J].Composites:Part A,2010,41(3)..410-418. |
| [8] | Zeng X,Raghavan J.Role of tool-part interaction in processinduced warpage of autoclave-manufactured composite structures[J].Composites:Part A,2010,41(9):1174-1183. |
| [9] | 张纪奎,郦正能,关志东,等.热固性复合材料固化过程三维有限元模拟和变形预测[J].复合材料学报,2009,26(1):174-178.Zhang Jikui,Li Zhengneng,Guan Zhidong,et al.Threedimensional finite element simulation and prediction for processinduced deformation of thermoset composites[J].Acta Materiae Compositae Sinica,2009,26(1):174-178. |
| [10] | Deng Shiqiang,Hou Meng,Ye Lin.Temperature-dependent elastic moduli of epoxies measured by DMA and their correlations to mechanical testing data[J].Polymer Testing,2007,26(6):803-813. |
| [11] | Garstka T,Ersoy N,Potter K D,et al.In situ measurements of through-the-thickness strains during processing of AS4/8552 composite[J].Composites:Part A,2007,38(12):2517-2526. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%