为提高多孔医用钛合金的生物活性,以实现快速骨整合,首先利用微弧氧化法(MAO)在多孔 Ti-3Zr-2Sn-3Mo-25Nb(TLM)合金表面制备出含Ca、P的次级微孔涂层,并在此涂层表面通过水热处理生成羟基磷灰石(HA),得到活性次级微孔涂层.采用X射线衍射、电子扫描显微镜和能谱仪分析了活性次级微孔涂层的相组成、微观形貌和元素特征,通过接触角测试实验对比研究了TLM钛合金表面改性前后的亲水性变化,并进一步通过动物实验研究了经表面活性次级微孔层改性后的多孔TLM钛合金的骨整合性能.结果表明,微弧氧化处理可在多孔TLM表面形成规整的含Ca、P相的次级微孔层,水热处理后微孔层的亲水性增强,且具有良好的成骨诱导性能.
参考文献
| [1] | Ti based biomaterials, the ultimate choice for orthopaedic implants - A review[J].Progress in materials science,2009(3):397. |
| [2] | Xuanyong Liu;Paul K. Chu;Chuanxian Ding .Surface modification of titanium, titanium alloys, and related materials for biomedical applications[J].Materials Science & Engineering, R. Reports: A Review Journal,2004(3/4):49-121. |
| [3] | Davide Zaffe .Some considerations on biomaterials and bone[J].Micron: The international research and review journal for microscopy,2005(7/8):583-592. |
| [4] | Bansiddhi,A;Sargeant,TD;Stupp,SI;Dunand,DC .Porous NiTi for bone implants: A review.[J].Acta biomaterialia,2008(4):773-782. |
| [5] | Takemoto M;Fujibayashi S;Neo M;Suzuki J;Kokubo T;Nakamura T .Mechanical properties and osteoconductivity of porous bioactive titanium[J].Biomaterials,2005(30):6014-6023. |
| [6] | Jones AC;Arns CH;Sheppard AP;Hutmacher DW;Milthorpe BK;Knackstedt MA .Assessment of bone ingrowth into porous biomaterials using MICRO-CT.[J].Biomaterials,2007(15):2491-2504. |
| [7] | Sameer R. Paital;Narendra B. Dahotre .Calcium phosphate coatings for bio-implant applications: Materials, performance factors, and methodologies[J].Materials Science & Engineering, R. Reports: A Review Journal,2009(1/3):1-70. |
| [8] | Yu Sen;Yu Zhentao;Wang Gui et al.Biocompatibility and osteoinduction of active porous calcium-phosphate films on novel Ti-3Zr-2Sn-3Mo-25Nb biomedical alloy[J].Colloids and Surfaces B:Biointerfaces,2011,85:103-115. |
| [9] | Li X;van-Blitterswijk CA;Feng Q;Cui F;Watari F .The effect of calcium phosphate microstructure on bone-related cells in vitro.[J].Biomaterials,2008(23):3306-3316. |
| [10] | C.Y. Zheng;S.J. Li;X.J. Tao;Y.L. Hao;R. Yang .Surface modification of Ti-Nb-Zr-Sn alloy by thermal and hydrothermal treatments[J].Materials science & engineering. C, Biomimetic materials, sensors and systems,2009(4):1245-1251. |
| [11] | Yu Zhentao;Zhou Lian .Influence of martensitic transformation on mechanical compatibility of biomedical β type titanium alloy TLM[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2006(1/2):391-394. |
| [12] | Z. Yu;G. Wang;X. Ma;Y.Zhang;M.S. Dargusch .Shape memory characteristics of a near β titanium alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2009(0):233-238. |
| [13] | Kim DY;Kim M;Kim HE .Formation of hydroxyapatite within porous TiO(2) layer by micro-arc oxidation coupled with electrophoretic deposition.[J].Acta biomaterialia,2009(6):2196-2205. |
| [14] | Li Y;Lee IS;Cui FZ;Choi SH .The biocompatibility of nanostructured calcium phosphate coated on micro-arc oxidized titanium.[J].Biomaterials,2008(13):2025-2032. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%