欢迎登录材料期刊网

材料期刊网

高级检索

以青铜粉为颜料,环氧改性有机硅树脂为粘合剂,采用喷涂法制备了环氧改性有机硅/青铜复合涂层.研究了热处理温度及热处理时间对所制备涂层外观、微结构、红外发射率及力学性能的影响.结果表明:环氧改性有机硅/青铜复合涂层最高可耐300 c℃高温,在300℃下热处理5h后,涂层外观、微结构保持不变,红外发射率低至0.228,力学性能保持完好,硬度、附着力和耐冲击性分别为4H、l级和50 em.所制备涂层在250℃下可长时间使用,在250℃下热处理100 h后,涂层外观、微结构仍然保持不变,红外发射率可低至0.227,力学性能保持完好,硬度、附着力和耐冲击性分别为4H、1级和50 em.

参考文献

[1] Fang, Shuaijun;Wang, Wei;Yu, Xili;Xu, Hong;Zhong, Yi;Sui, Xiaofeng;Zhang, Linping;Mao, Zhiping.Preparation of ZnO:(Al, La)/polyacrylonitrile (PAN) nonwovens with low infrared emissivity via electrospinning[J].Materials Letters,2015Mar.15(Mar.15):120-123.
[2] Solovyev, A. A.;Rabotkin, S. V.;Kovsharov, N. F..Polymer films with multilayer low-E coatings[J].Materials science in semiconductor processing,2015:373-380.
[3] Chen J;Zhou YM;Nan QL;Sun YQ;Ye XY;Wang ZQ.Synthesis, characterization and infrared emissivity study of polyurethane/TiO2 nanocomposites[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,200723(23):9154-9158.
[4] Wu, G.;Yu, D..Preparation of a novel infrared low-emissive coating from the Cu powder modified by the polyethylene wax[J].Infrared physics and technology,20121(1):26-31.
[5] 于献;郁飞;倪维良;谭伟民.黄绿色红外低发射率无光涂层的制备及表征[J].涂料工业,2015(5):18-22.
[6] Huijuan Yu;Guoyue Xu;Xingmei Shen;Xiaoxing Yan;Chuangwei Cheng.Low Infrared Emissivity Of Polyurethane/cu Composite Coatings[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,200912(12):6077-6081.
[7] 任玥;华萍;龚荣洲.基于环氧树脂的低红外发射率材料研究[J].兵器材料科学与工程,2011(2):45-48.
[8] 李正浩;酒红芳;刘亚青;何岷洪;张立新;孙友谊.三元乙丙橡胶低红外发射率涂层的制备与表征[J].涂料工业,2012(1):36-38.
[9] 李叶;张志毅;寿金泉;温凯;张焕;白利忠;刘亚青.低红外发射率涂层的制备及耐高温性能研究[J].中国胶粘剂,2015(9):37-40.
[10] Chen Hu;Guoyue Xu;Xingmei Shen.Preparation and characteristics of thermal resistance polysiloxane/Al composite coatings with low infrared emissivity[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,20091/2(1/2):371-375.
[11] Yan, X.;Xu, G..Corrosion and mechanical properties of epoxy-polyurethane/bronze composite coatings with low infrared emissivity[J].Surface & Coatings Technology,20107(7):2307-2312.
[12] Zhang, W.;Xu, G.;Ding, R.;Duan, K.;Qiao, J..Nacre biomimetic design - A possible approach to prepare low infrared emissivity composite coatings[J].Materials science & engineering, C. Biomimetic and supramolecular systems,20131(1):99-102.
[13] 徐飞凤;徐国跃;谭淑娟;陈砚朋;郭腾超;李泉灵;郭一辰.8~14μm波段低红外发射率与低光泽度兼容涂层的制备方法初探[J].兵器材料科学与工程,2011(4):5-9.
[14] 石枭;徐国跃;张伟钢;马惠;张建超;王慧慧.不同固化剂对红外低发射率涂层力学性能的影响[J].兵器材料科学与工程,2015(3):5-7.
[15] Chuang, FS.Analysis of thermal degradation of diacetylene-containing polyurethane copolymers[J].Polymer Degradation and Stability,20077(7):1393-1407.
[16] Kumar SA.;Narayanan TSNS..Thermal properties of siliconized epoxy interpenetrating coatings [Review][J].Progress in Organic Coatings: An International Review Journal,20024(4):323-330.
[17] 王雅君;徐国跃;李九芬;胡晨.有机硅基低发射率复合涂层的热老化性能研究[J].红外技术,2010(8):449-452.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%