欢迎登录材料期刊网

材料期刊网

高级检索

利用扫描电镜(SEM)、透射电镜(TEM)对TMCP工艺生产的X100管线钢的显微组织进行了观察与分析,并在此基础上对X100管线钢的强化机理进行了研究。结果表明:TMCP工艺生产X100管线钢是可行的;X100管线钢的显微组织以粒状贝氏体为主,同时弥散分布着大量细小的M/A岛和少量的板条贝氏体;X100管线钢的强化机制主要为组织细化和贝氏体相变强化。

The microstrueture of X100 pipeline steel produced by TMCP was observed and analyzed by SEM and TEM. On the basis of this analysis, the strengthening mechanism of X100 pipeline steel was studied. The results show that it is possible to produce X100 pipeline steel by TMCP process. Moreover, the microstructure of X100 pipeline steel mainly consists of massive granular bainite, and some fine and dispersive M/A islands with a few lath bainite in the matrix also. The strengthening of X100 pipeline steel mainly depend on bainite transformation and precipitation strengthening.

参考文献

[1] B. Tanguy;T. T. Luu;G. Perrin;A. Pineau;J. Besson .Plastic and damage behaviour of a high strength X100 pipeline steel: Experiments and modelling[J].International Journal of Pressure Vessels and Piping,2008(5):322-335.
[2] 李鹤林.天然气输送钢管研究与应用中的几个热点问题[J].焊管,2000(03):43-61.
[3] WANG Yi-kang;PAN Jia-hua .High Performance Pipe Steels[R].北京,2005.
[4] 黄开文.国外高钢级管线钢的研究与使用情况[J].焊管,2003(03):1-10.
[5] 李鹤林.油气输送钢管的发展动向与展望[J].焊管,2004(06):1-11.
[6] 周民,马秋花,杜林秀,刘相华.X100管线钢的组织性能[J].东北大学学报(自然科学版),2009(07):985-988.
[7] 王路兵,任毅,张鹏程,武会宾,唐获.高级别管线钢X100的试验研究[J].钢铁,2008(01):80-84.
[8] ItmanA;CardosoKR;KestenbachHJ.含铌和钛的微合金热轧带钢中碳氮化物析出的定量研究[J].钢铁钒钛,1998(02):59.
[9] Misra R D K;Weatherly G C;Hartmann J E et al.Ultrahigh Strength Hot Rolled Microalloyed Steels Mierostructural Aspects of Development[J].Materials Science and Technology,2001,17:1119.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%