以大型商用有限元软件ABAQUS为计算平台,提出了正交各向异性复合材料结构材料参数的识别方法.将材料参数识别的问题转化为极小化目标函数的问题,其中目标函数定义为测量位移与有限元计算的相应位移之差的平方和.采用Levenberg-Marquardt方法极小化目标函数,其中灵敏度的计算基于复合材料的有限元离散结构的求解方程对识别的材料参数求导.数值算例表明本文中提出的方法是有效的.在识别参数过程中,参数的初值以及搜索范围的确定对于识别结果有着重要影响.因此必须充分利用材料参数的先验信息.ABAQUS是高效可靠的商用有限元软件,提出的参数识别方法基于这类商用软件,因而该方法有很强的实用性.
参考文献
| [1] | Wang W T,Kam T Y.Material characterization of laminated composite plates via static testing[J].Composite Structures,2000,50(4):347-352. |
| [2] | Lecompte D,Smits A,SOl H,Vantomme J,Hemelrijck D V.Mixed numerical-experimental technique for orthotropic parameter identification using biaxial tensile tests on cruciform specimens[J].International Journal of Solids and Structures,2007,44(5):1643-1656. |
| [3] | 王震鸣.复合材料力学和复合材料结构力学[M].北京:机械工业出版社,1991. |
| [4] | Rikards R,Chate A.Identification of elastic properties of composites by method of planning of experiments[J].Composite Structures,1998,42(3):257-263. |
| [5] | Pedersen P,Frederiksen P S.Identification of orthotropic material moduli by a combined experimental-numerical method[J].Measurement,1992,10(3):113-118. |
| [6] | Frederiksen P S.Experimental procedure and results for the identification of elastic constants of thick orthotropic plates[J].Journal of Composite Materials,1997,31 (4):360-382. |
| [7] | Rikards R,Chate A,Gailis G.Identification of elastic properties of laminates based on experimental design[J].International Journal of Solids and Structures,2001,38 (30/31):5097-5115. |
| [8] | Meuwissen M H H,Oomens C W J,Baaijens F P T,et al.Determination of the elasto-plastic properties of aluminium using a mixed numerical-experimental method[J].Journal of Materials Processing Technology,1998,75(1/3):204-211. |
| [9] | Ayorinde E O.Elastic constants of thick orthotropic composite plates[J].Journal of Composite Materials,1995,29(8):1025-1039. |
| [10] | Huang L X,Son X S,Liu Y H,Cen Z Z.Parameter identification for two-dimensional orthotropic material bodies by the boundary element method[J].Engineering Analysis with Boundary Elements,2004,28(2):109-121. |
| [11] | 孙秀山,黄立新,刘应华,岑章志,方东平.二维正交各向异性结构弹塑性问题的边界元分析[J].复合材料学报,2005,22(3):156-161.Sun Xiushan,Huang Lixin,Liu Yinghua,Cen Zhangzhi,Fang Dongping.Boundary element analysis for elasto-plastic problem of 2-D orthotropic structure[J].Acta Materiae Compositae Sinica,2005,22(3):156-161. |
| [12] | 熊渊博,龙述尧,李光耀.层合板分析的无网格局部Petrov-Galerkin方法[J].复合材料学报,2005,22(6);165-171.Xiong Yuanbo,Long Shuyao,Li Guangyao.A meshless local Petrov-Galerkin method for the laminated plates[J].Acta Materiae Compositae Sinica,2005,22(6):165-171. |
| [13] | 王勖成.有限单元法[M].北京:清华大学出版社,2003. |
| [14] | Rus G,Gallego R.Optimization algorithms for identification inverse problems with the boundary element method[J].Engineering Analysis with Boundary Elements,2002,26(4):315-327. |
| [15] | 沈观林,胡更开.复合材料力学[M].北京:清华大学出版社,2006. |
| [16] | 席少霖,赵凤治.最优化计算方法[M].上海:上海科学技术出版社,1983. |
| [17] | Chern S M,Tuttle M E.On displacement fields in orthotropic laminates containing an elliptical hole[J].Journal of Applied Mechanics,2000,67(3):527-539. |
| [18] | Daniel I M,Rowlands R E,Whiteside J B.Deformation and failure of boron-epoxy plate with circular hole[C]// Whitney J M.Analysis of the Test Methods for High Modulus Fibers and Composites,ASTM STP 521.Philadelphia:American Society for Testing and Materials,1973:143-164. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%