通过组织观察以及TEM与XRD技术研究了低碳Cr-Mo系深冲双相钢组织与织构演变规律.结果表明:奥氏体未再结晶区终轧有利于形成{112}〈111〉织构,冷轧过程中{001}〈110〉,{112}〈110〉与{223}〈110〉织构稳定增加,退火过程中形成有利于深冲性能的〈111〉//ND以及{554}〈225〉与｛332}〈113〉织构；820℃与860℃临界区退火后γ纤维织构密度差异较小,但是高温退火增大{111}〈110〉与{111}〈112〉织构的取向密度差值,归因于贝氏体中的固溶碳以及贝氏体相变时的变体选择；高温卷取能诱发热轧板中Mo基碳化物粒子析出,并在退火保温过程中回溶,既能发展再结晶织构,又能促进第二相形成.
参考文献
| [1] | 康永林,陈贵江,朱国明,宋仁伯.新一代汽车用先进高强钢的成形与应用[J].钢铁,2010(08):1-6,19. |
| [2] | Seong-Ho Han;Shi-Hoon Choi;Jae-Kwon Cho;Hwan-Goo Seong;In-Bae Kim .Effect of hot-rolling processing on texture and r-value of annealed dual-phase steels[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2010(7/8):1686-1694. |
| [3] | HUTCHINSON W B .Development and control of annealing textures in low-carbon steels[J].International Materials Reviews,1984,29(01):25-42. |
| [4] | 赵骧;関史江;伊藤邦夫 等.高纯超低碳深冲钢板的固溶碳含量对再结晶γ织构的影响[J].金属学报,1995,31(06):262-265. |
| [5] | HUH .Studies on the development of high-strength dual-phase steel sheets with high rm values[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1982,13(07):1257-1262. |
| [6] | 马鸣图;吴宝荣.双相钢的物理与冶金[M].北京:冶金工业出版社,2009 |
| [7] | Kang, J.-Y.;Lee, H.-C.;Han, S.H..Effect of Al and Mo on the textures and microstructures of dual phase steels[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2011:183-190. |
| [8] | Hiromi Yoshida;Kaneharu Okuda;Hidetaka Kawabe .Effect of niobium addition on the texture formation of high strength cold-rolled low carbon steel sheets[J].Materials Science Forum,2007(Pt.1):425-430. |
| [9] | RAY R K;JONAS J J;BUTRON-GUILLEN M P et al.Transformation textures in steels[J].ISIJ International,1994,34(12):927-942. |
| [10] | RAY R K;JONAS J J .Cold rolling and annealing textures in low carbon and extra low carbon steel[J].International Materials Reviews,1994,39(04):129-172. |
| [11] | RAY R K .Orientation distribution function analysis of texture in a dual-phase steel[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,1986,77:169-174. |
| [12] | BUTRON GUILLEN M P;JONAS J J;RAY R K .Effect of austenite pancaking on texture formation in a plain carbon and a Nb microalloyed steel[J].Acta Metallurgica Et Materialia,1994,42(11):3615-3627. |
| [13] | INAGAKI H .Fundamental aspect of texture formation in low carbon steel[J].ISIJ International,1994,34(04):313-321. |
| [14] | J.-Y. Kang;B. Bacroix;H. Regie .Effect of deformation mode and grain orientation on misorientation development in a body-centered cubic steel[J].Acta materialia,2007(15):4935-4946. |
| [15] | Yasunobu NAGATAKI;Yoshihiro HOSOYA .Origin of the Recrystallization Texture Formation in an Interstitial Free Steel[J].ISIJ International,1996(4):451-460. |
| [16] | 杨平,李志超,毛卫民,赵子苏.钢中{111}〈112〉再结晶织构的形成[J].材料热处理学报,2009(03):46-52. |
| [17] | KLINKENBERG C;RAABE D;LUCKE K .Influence of intercritical annealing on the texture formation in low-carbon steel strips[J].Steel Research International,1993,64(05):262-266. |
| [18] | DANIEL D;SAVOIE J;JONAS J J .Texture induced by tension and deep drawing in low carbon and extra low carbon steel sheets[J].Acta Metallurgica Et Materialia,1993,41(06):1905-1920. |
| [19] | Hutchinson B.;Lindh E.;Tagashira K.;Ryde L. .Texture in hot rolled austenite and resulting transformation products[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1998(1):9-17. |
| [20] | EMADODDIN E;AKBARZADEH A;DANESHI G .Effect of cold rolling reduction and intercritical annealing temperature on the bulk texture of two TRIP aid steel sheets[J].Journal of Materials Processing Technology,2008,203(1-3):293-300. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%