工业化试制了3种厚度规格(20,26和36mm)的新型低成本高焊接性能船板钢EH36.试制钢板的显微组织由多边形铁素体和针状铁素体构成,其力学性能满足EH36级别船板要求并具有优异的低温韧性.采用焊接热模拟评价了钢板的焊接性能,当热输入由30kJ/cm升高至160kJ/cm时,粗晶区原奥氏体晶粒尺寸逐渐增大,其组织也逐渐由粒状贝氏体向晶界铁素体+晶内针状铁素体+晶内多边形铁素体转变,维氏硬度逐渐下降,低温韧性优异.得益于TiN粒子对奥氏体晶粒长大的抑制作用,微量B元素对先共析铁素体转变的抑制作用以及BN粒子对晶内铁素体形核的促进作用,焊接粗晶区获得了有利于韧性的细化组织,保证了粗晶区具有优异的低温韧性.双丝埋弧焊试验也验证了钢板具有优异的焊接性能.
参考文献
| [1] | 戴永佳,王化明,詹毅,陈俊宏,姜家棋.船用钢发展历史与现状分析[J].中国水运（下半月）,2012(06):33,36. |
| [2] | 舒玮,王学敏,李书瑞,贺信莱.含Ti复合第二相粒子对微合金钢焊接热影响区组织和性能的影响[J].金属学报,2010(08):997-1003. |
| [3] | Mabuchi H,Uemori R,Fujioka M .The Role of Mn Depletion in Intra-Granular Ferrite Transformation in the Heat Affected Zone of Welded Joints With Large Heat Input in Structural Steels[J].ISIJ International,1996,39(11):1406.,1996. |
| [4] | 曲占元.埋弧焊线能量对船用E36钢焊缝低温冲击韧性的影响[J].材料开发与应用,2010(04):7-9. |
| [5] | Sasaki K,Suda K,Motomatsu R I,et al .Development of Two-Electrode Electrogas Arc Welding Process[J].Nippon Steel Technical Report,2004,90(7):67.,2004. |
| [6] | Kojima A,Yoshii K I,Hada T .Development of High HAZ Toughness Steel Plates for Box Columns With High Heat Input Welding[J].Nippon Steel Technical Report,2004,90 |
| [7] | 杨才福,柴锋,苏航.大线能量焊接船体钢的研究[J].上海金属,2010(01):1-10. |
| [8] | 张宇,陈少慧,马毅.提高钢板HAZ韧性“SHTT”技术的开发[N].世界金属导报,2011-09-11.,2011. |
| [9] | 张宇,许红梅,潘鑫,等.大线能量焊接船板EH40气电立焊接头的组织和性能[J].焊接,2013(3):41.,2013. |
| [10] | Han S Y,Shin S Y,Seo C H,et al .Effects of Mo,Cr,and V Additions on Tensile and Charpy Impact Properties of API X80 Pipeline Steels[J].Metallurgical and Materials Transactions,2009,40(8):1851.,2009. |
| [11] | Pickering F R.The Structure and Properties of Bainite in Steels[C]//Transformation and Hardenability in Steels,Symposium Proceedings.Ann Arbor:Climax Molybdenum Company of Michigan,1967:109.,1967. |
| [12] | ZHANG D,Shintaku Y,Suzuki S,et al .In Situ Observation of Phase Transformation in Low-Carbon,Boron-Treated Steels[J].Metallurgical and Materials Transactions,2012,43 |
| [13] | Farrar R A,ZHANG Z,Bannister S R .The Effect of Prior Austenite Grain Size on the Transformation Behaviour of C-Mn-Ni Weld Metal[J].Journal of Materials Science,1993,28(5):1385.,1993. |
| [14] | Tomita Y,Staio N,Tsuzuki T,et al .Improvement in HAZ Toughness of Steel by TiN-MnS Addition[J].ISIJ International,1994,34(10):829.,1994. |
| [15] | Vedani M,Mannucci A .Effects of Titanium Addition on Precipitate and Microstructural Control in C-Mn Microalloyed Steels[J].ISIJ International,2002,42(12):1520.,2002. |
| [16] | Wiesner C S.Predicting Structural Crack Arrest Behaviour Using Small-Scale Material Characterisation Tests[J].International Journal of Pressure Vessels and Piping,19 9 6,6 9 (2):185.,1996. |
| [17] | Hashemi S H .Apportion of Charpy Energy in API 5L Grade X70 Pipeline Steel[J].International Journal of Pressure Vessels and Piping,2008,85(12):879.,2008. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%