采用不连续称重法测得了奥氏体耐热不锈钢309S在不同温度下的高温氧化动力学曲线,结果表明309S钢高温氧化动力学曲线遵循抛物线规律.利用扫描电镜、X射线衍射和XPS的方法对氧化膜表面的形貌及化学元素沿氧化膜纵深方向的分布情况进行了研究,发现各温度下的氧化膜均均匀覆盖于基体表面;500℃下氧化膜氧化产物表层主要为Cr2O3和Fe2O3,内层主要为Cr2O3和NiO;1 000℃下氧化膜表层主要成分为Cr2O3、NiO、Fe3O4或Fe2O3,氧化膜内层基本不含NiO,主要为Cr2O3、Fe3O4或Fe2O3.
Kinetic curves of 309S at various temperatures, which were found to be parabolic, were obtained byweight gain method. Morphology of oxide scale and phase composition along depth direction were studied by SEM,XRD and XPS. The result indicated that substrates were continuously covered by oxide at different temperature.At 500℃, outer layer of the scale was mainly composed of Cr2O3and Fe2O3, however, Cr2O3and NiO were pre-dominant phase in inner layer of the scale; at 1 000℃, the outer layer of the scale was mainly composed of Cr2O3,NiO, Fe3O4or Fe2O3; while in inner layer of the scale, NiO was negligible and Cr2O3, Fe3O4or Fe2O3were pre-dominant phase.
参考文献
| [1] | 肖纪美.不锈钢的金属学问题[M].北京:冶金工业出版社,2006 |
| [2] | 李美栓.金属的高温腐蚀[M].北京:冶金工业出版社,2001 |
| [3] | Basabe VV;Szpunar JA .Growth rate and phase composition of oxide scales during hot rolling of low carbon steel[J].ISIJ International,2004(9):1554-1559. |
| [4] | 焦隽.SN400B钢板表面氧化铁粉缺陷原因分析及对策[J].宝钢技术,2005(06):69-71. |
| [5] | 朱雪梅,王新建,刘明,张彦生.Fe-30Mn-9Al奥氏体钢高温循环氧化特征[J].腐蚀科学与防护技术,2005(01):31-33,38. |
| [6] | Baleix S.;Bernhart G.;Lours P. .Oxidation and oxide spallation of heat resistant cast steels for superplastic forming dies[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(2):155-166. |
| [7] | 朱日彰;何业东;齐慧滨.高温腐蚀及耐高温腐蚀材料[M].上海:上海科学技术出版社,1993 |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%