研究了硫酸铜加入量对化学镀Ni-Cu-P合金的镀层成分、组织及热稳定性影响，用中性盐雾实验和在20% H2SO4+20 g/LAl2O3溶液中的冲刷腐蚀实验研究了Ni-P与Ni-Cu-P合金的耐蚀性和耐冲刷腐蚀性能.结果表明，Ni-Cu-P合金镀层具有比Ni-P合金镀层更好的热稳定性、耐蚀性和耐冲刷腐蚀性能.
The effect of CuSO4 content of the bath on the composition, microstructure and thermal stability of electroless Ni-Cu-P coating was examined by SEM with EDAX.The anticorrosion properties of Ni-P and Ni-Cu-P coatings were compared by the standard salt spray and erosion corrosion test in a solution of 20% H2SO4+20 g/LAl2O3.The results show that the thermal stability, corrosion resistance and erosion corrosion resistance of Ni-Cu-P alloy coating were all superior to those of electroless Ni-P alloy coating
参考文献
| [1] | 黄亮，高岩，郑志军，等. Cu对铝基化学镀Ni-Cu-P镀层耐蚀性的影响[J]. 功能材料, 38(4):683 [2] 周丽，殷凤仕. 化学镀镍-铜-磷三元合金层的制备及其组织与性能研究[J]. 热加工工艺, 36(8):55[3]Ashassi-Sorkhabi H，Dolati H，Parvini-Ahmadi N，et al.Electroless deposition of Ni-Cu-P alloy and study of the influences of some parameters on the properties of deposits［J］.Applied Surface Science，2002(185)：155.[4]赵芳霞，刘琛，张振忠，等.Ni-P和Ni-Cu-P化学镀层对比研究［J］.材料保护，2006，39(3)：65.[5] 张志明，黄新民，刘岩，等. 化学镀Ni-Cu-P合金镀层[J]. 电镀与精饰, 29(2):12[6] 刘波，黄燕滨，张平，等. 酸性化学镀Ni-Cu-P工艺及性能研究[J]. 电镀与涂饰, 24(3):18 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%