采用快淬法制备了(Fe1-xCox)85Si9.6Al5.4(x=0,0.05,0.10,0.15,0.20,质量分数,%)四元合金薄带,经高能球磨获得扁平化程度良好的微粉.球磨粉在氮气保护下,在773 K退火30min.退火磁粉与适量环氧树脂相混合,在30 MPa下压制成φ19mm×φ10mm×3mm的圆环样品,利用XRD,VSM等研究了Co添加对Fe-Si-Al微粉结构和磁性能的影响.结果表明:添加Co并不改变快淬薄带样品的相结构,但能显著提高居里温度;当x=0.15时,获得最大的饱和磁化强度Ms真为129.8 A·m2/kg,圆环样品在GHz频段均显示良好的抗电磁干扰特性,x=0.15的样品截止频率达到1.154GHz.
参考文献
[1] | 田民波.磁性材料[M].北京:清华大学出版社,2000:71. |
[2] | Yoshizawa Y;Oguma S;Yamauchi K .[J].Journal of Applied Physics,1988,64:6044. |
[3] | 曹琦,龚荣洲,冯则坤,聂彦.Fe-Si-Al系合金粉微波吸收特性[J].中国有色金属学报,2006(03):524-529. |
[4] | Yoshida S.;Ando S.;Shimada Y.;Suzuki K.;Nomura K.;Fukamichi K. .Crystal structure and microwave permeability of very thin Fe-Si-Al flakes produced by microforging[J].Journal of Applied Physics,2003(10 Pt.2):6659-6661. |
[5] | Suzuki K;Makino A;Inoue A et al.[J].Journal of Applied Physics,1991,70:6232. |
[6] | Hono K;Hiraga K;Wang Q et al.[J].ACTA METALLURGICA,1992,40:2137. |
[7] | 王伟,马天宇,罗伟,严密.快淬Fe-Si-Al软磁合金的扁平化、微结构与电磁性能研究[J].稀有金属材料与工程,2008(03):513-516. |
[8] | Gercsi Z;Mazaleyrat F;Varga L K et al.[J].Journal of Magnetism and Magnetic Materials,2006,302:454. |
[9] | Gomez-Polo C .[J].Physical Review B,2001,65:024433. |
[10] | Willard MA.;Mchenry ME.;Thoma D.;Sickafus K.;Cross JO. Harris VG.;Laughlin DE. .Structure and magnetic properties of (Fe0.5Co0.5)(88)Zr7B4Cu1 nanocrystalline alloys[J].Journal of Applied Physics,1998(12):6773-6777. |
[11] | Takahashi M;Arai H;Tanaka T et al.[J].IEEE Transactions on Magnetics,1986,22:638. |
[12] | Fecht H J .[J].Nanostructured Materials,1995,6:33. |
[13] | Yanagimoto K;Majima K;Sunada S et al.[J].IEEE Transactions on Magnetics,2004,40:1691. |
[14] | Hayakawa M;Hasashi K;Ishikawa W et al.[J].IEEE Transactions on Magnetics,1987,23:3092. |
[15] | Muller M;Grahl H;Mattern N et al.[J].Journal of Magnetism and Magnetic Materials,1996,160:284. |
[16] | Yoshizawa Y;Ogawa Y .[J].IEEE Transactions on Magnetics,2005,41:3271. |
[17] | 宛德福;马兴隆.磁性物理学[M].北京:电子工业出版社,1999:177. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%