先进结构陶瓷具有优异的高温力学性能,而金属材料具有良好的塑性及其可加工等性能,将两种材料连接起来可用于有特殊要求的场合,对典型的先进结构陶瓷(Al2O3、SiC和Si3N4等)与金属材料(钛合金、镍基合金和铜等)的钎焊连接工艺、钎料接头性能等方面的研究进展进行了综述,并对陶瓷与金属钎焊连接技术的发展方向进行了展望.
参考文献
| [1] | Tang WM.;Zheng ZX.;Ding HF.;Jin ZH. .Control of the interface reaction between silicon carbide and iron[J].Materials Chemistry and Physics,2003(1):360-365. |
| [2] | Hua-Ping Xiong;Bo Chen;Yan-Sheng Kang .Wettability of Co-V. and PdNi-Cr-V system alloys on SiC ceramic and interfacial reactions[J].Scripta materialia,2007(2):173-176. |
| [3] | S.D.Peteves;M.Paulasto;G.Ceccone .The reactive route to ceramic joining: fabrication, interfacial chemistry and joint properties[J].Acta materialia,1998(7):2407-2414. |
| [4] | Robert W. Messler, Jr .The challenges for joining to keep pace with advancing materials and designs[J].Materials & Design,1995(5):261-269. |
| [5] | Y.C.Yoo;J.H.Kim .Microstructural characterization of Al_2O_3/AISI 8650 steel joint brazed with Ag-Cr-Sn-Zr alloy[J].Materials Letters,2000(6):362-366. |
| [6] | M. Rohde;I. Siidmeyer;A. Urbanek .Joining of alumina and steel by a laser supported brazing process[J].CERAMICS INTERNATIONAL,2009(1):333-337. |
| [7] | Z. S. Yu;M. F. Wu;C. Liang;F. J. Wang;K. Qi .Interfacial morphology and strength of Al{sub}2O{sub}3/Nb joint brazed with Cu-Ti-Zr filler metal[J].Materials Science and Technology: MST: A publication of the Institute of Metals,2002(1):99-102. |
| [8] | R. M. Do Nascimento;A. E. Martinelli .Brazing Al2O3 to sintered Fe-Ni-Co alloys[J].Journal of Materials Science,1999(23):5839-5845. |
| [9] | G. M. Newaz;S. Q. Nusier;Z. A. Chaudhury .Damage accumulation mechanisms in thermal barrier coatings[J].Journal of engineering materials and technology,1998(2):149-153. |
| [10] | O. Smorygo;J.S. Kim;M.D. Kim .Evolution of the interlayer microstructure and the fracture modes of the zirconia/Cu-Ag-Ti filler/Ti active brazing joints[J].Materials Letters,2007(2):613-616. |
| [11] | A. V. Durov;B. D. Kostjuk;A. V. Shevchenko;Y. V. Naidich .Joining of zirconia to metal with Cu-Ga-Ti and Cu-Sn-Pb-Ti fillers[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2000(1/2):186-189. |
| [12] | P. Prakash;T. Mohandas;P. Dharma Raju .Microstructural Characterization of SiC Ceramic and SiC-Metal Active Metal Brazed Joints[J].Scripta materialia,2005(11):1169-1173. |
| [13] | Guobiao Lin;Jihua Huang;Hong Zhang .Joints of carbon fiber-reinforced SiC composites to Ti-alloy brazed by Ag-Cu-Ti short carbon fibers[J].Journal of Materials Processing Technology,2007(1/3):256-261. |
| [14] | Hua-Ping Xiong;Wei Mao;Yong-Hui Xie .Brazing of SiC to a wrought nickel-based superalloy using CoFeNi(Si, B)CrTi filler metal[J].Materials Letters,2007(25):4662-4665. |
| [15] | 吕宏,康志君,楚建新,张小勇.铜基钎料钎焊SiC/Nb的接头组织及强度[J].焊接学报,2005(01):29-31. |
| [16] | Gurdial Blugan;Jakob Kuebler;Vinzenz Bissig .Brazing of silicon nitride ceramic composite to steel using SiC-particle-reinforced active brazing alloy[J].CERAMICS INTERNATIONAL,2007(6):1033-1039. |
| [17] | G. Blugan;J. Janczak-Rusch;J. Kuebler .Properties and fractography of Si_3N_4/TIN ceramic joined to steel with active single layer and double layer braze filler alloys[J].Acta materialia,2004(15):4579-4588. |
| [18] | Kim JJ.;Park JW.;Eagar TW. .Interfacial microstructure of partial transient liquid phase bonded Si3N4-to-Inconel 718 joints[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):240-244. |
| [19] | W. TILLMANN;E. LUGSCHEIDER;K. SCHLIMBACH;C. MANTER;J. E. INDACOCHEA .Heat-Resistant Active Brazing of Silicon Nitride Part 2: Metallurgical Characterization of the Braze Joint[J].Welding Journal,1998(3):103S-109S. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%