将布拉格光纤光栅(FBG)埋植于复合材料T型加筋板结构非干涉区-三角填充区作为应变传感器对复合材料加筋板在固化过程及冲击后压缩过程中的应变变化进行监测.对比了光纤刻栅区采用UV光固化树脂涂层保护和未保护的两种FBG传感器的波谱信号变化；分析了复合材料在固化成型过程中产生的非轴对称热残余应力对FBG传感性能的影响.结果表明,刻栅区采用聚合物涂层保护的FBG传感器的半峰宽(FWHM)在固化过程中未发生变化,并且聚合物涂层可以有效地消除非轴对称热残余应力对光纤光栅反射波谱的影响.在冲击后压缩过程中,采用聚合物涂层保护的FBG传感器测得的应变与贴于试样表面的应变片测得的应变数据一致性较好.本文对埋植于复合材料加筋板三角填充区的FBG传感器在复合材料固化过程及冲击后压缩过程中应变监测的有效性及可靠性进行了有益的探索.
参考文献
| [1] | Rodrigo A S M,Munoz S,Roberto A L A.et al.Structural health monitoring of marine composite structural joints using embedded fiber bragg grating strain sensors[J]. Composite Structures,2009,89(2):224-234. |
| [2] | 常新龙,何祥勇,周家丹,等.FBG传感器在复合材料固化监测中的应用[J].传感技术学报,2010,23(5):750-753.Chang Xinlong, He Xiangyong, Zhou Jiadan, et al.Application of fiber bragg grating in cure monitoring of composite[J]. Chinese Journal of Sensors and Actuators,2010,23(5)..750-753. |
| [3] | 益小苏.先进复合材料技术研究与发展[M].北京:国防工业出版社,2006:2-8.Yi Xiaosu.Research and development of advanced composites technology[M].Beijing:National Defense Industry Press,2006:2-8. |
| [4] | Hao Juncai,Leng Jinsong,Wei Zhang. Non-destructive evaluation of composite pressure vessel by using FBG sensors[J].Chinese Journal of Aeronautics,2007,20(2): 120-122. |
| [5] | 孙 丽.光纤光栅传感技术与工程应用研究[D].大连:大连理工大学,2006:6-13.Sun Li.Research of fiber bragg grating sensing technology and engineering application[D]. Dalian: Dalian University of Technology,2006:6-13. |
| [6] | Takeda S,Aoki Y,Ishikawa T,et al. Structural health monitoring of composite wing structure during durability test[J].Composite Structures,2007,79(1):133-139. |
| [7] | Takeda S,Okabe Y,Takeda N.Delamination detection in CFRP laminates with embedded small-diameter fiber bragg grating sensors[J].Composite Part A 2002,33(7):971-980. |
| [8] | De Baere I,Luyckx G,Voet E,et al.On the feasibility of optical fiber sensors for strain monitoring in thermoplastic composites under fatigue loading conditions[J].Optics and Lasers in Engineering,2009,47(3):403-411. |
| [9] | 万里冰,武湛君,张博明,等.光纤布拉格光栅监测复合材料固化[J].复合材料学报,2004,21(3):1-5.Wan Libing, Wu Zhanjun, Zhang Boming et al. Cure monitoring of composites using fiber bragg grating sensors[J].Acta Materiae Compositae Sinica,2004,21(3):1-5. |
| [10] | 武湛君,张博明,万里冰.单根光纤光栅监测复合材料固化工艺过程多目标参量技术的研究[J].复合材料学报,2004,21(6):82-86.Wu Zhanjun, Zhang Boming, Wan Libing. Multi-parameters monitoring for fiber reinforced plastics with a single fiber bragg grating[J].Acta Materiae Compositae Sinica,2004,21(6):82-86. |
| [11] | Takeda S, Minakuchi S, Okabe Y, et al. Delamination monitoring of laminated composites subjected to low-velocity impact using small-diameter FBG sensors[J].Composite Part A,2005,36(7):903-908. |
| [12] | 赵海涛,张博明,武湛君,王殿福,戴福洪.光纤光栅智能复合材料基础问题研究[J].传感器与微系统,2007,26(12):27-28.Zhao Haitao,Zhang Boming,Wu Zhanjun,Wang Dianfu,Dai Fuhong.Infrastructure study for optical fiber grating in smart composite materials [J]. Transducer and Microsystem Technologies,2007,26(12):27-28. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%