To improve the accuracy and speed of finite element calculation, a new friction model was proposed, in which a layer of thin friction element between the roller and workpiece was introduced to consider the contact fric-tion. This model was used in the three-dimensional elastic-plastic finite element model of strip rolling process. Tak-ing the geometrical size and physical characteristics of intermediate medium between roller and workpiece into consid-eration, the stiffness of the friction element was corrected by two factors, i.e., the thickness of friction element and βfactor. Without any assumption about the value and direction of friction force and neutral point position, the rolling process was simulated by using this model. The results obtained by this model were compared with the experimental results and the feasibility of the model was verified.
参考文献
| [1] | Jiang Z Y;Xiong S W;Tieu A K et al.Modelling of the Effect of Friction on Cold Strip Rolling[J].Journal of Materials Processing Technology,2008,201(1/2/3):85. |
| [2] | Tieu A K;Li E B;Liu Y J .An Experimental Determination of Friction in Cold Rolling[J].Tribology and Interface Engineering Series,2000,38(03):467. |
| [3] | LIU Cai .Treatments of Friction in FEM for Metal Forming Process[J].Journal of Northeast Institute of Heavy Machinery,1989,13(03):19. |
| [4] | Liu C;Hartley P;Sturgess C E N et al.Elastic-Plastic FiniteElement Modelling of Cold Rolling Of Strip[J].International Journal of Mechanical Sciences,1985,27(7/8):531. |
| [5] | Z. Y. Jiang;A. K. Tieu .A 3-D finite element method analysis of cold rolling of thin strip with friction variation[J].Tribology International,2004(2):185-191. |
| [6] | Lee E H;Mallet R L;Mcmeeking R M.Stress and Deformation Analysis of Metal Forming Manufacturing Processes[A].LISA:ASME,1977:85. |
| [7] | Oh S I .Finite Element Analysis of Metal Forming Processes With Arbitrarily Shaped Dies[J].International Journal of Mechanical Sciences,1982,24(08):479. |
| [8] | Zienkiewicz O C;Jain P C .Flow of Solids During Forming and Extrusion..Some Aspects of Numerical Solutions[J].International Journal of Solids and Structures,1978,14(01):15. |
| [9] | Hartley P;Sturgess C E N;Rowe G W .Friction in Finite-Element Analyses of Metal Forming Processes[J].International Journal of Mechanical Sciences,1979,21(05):301. |
| [10] | Hartley P;Sturgess C E N;Rowe G W .Influence of Friction on the Prediction of Forces.Pressure Distributions and Properties in Upset Forging[J].International Journal of Mechanical Sciences,1980,22(12):743. |
| [11] | Liu C;Hartley P;Sturgess C E N et al.Simulation of the Cold Rolling of Strip Using an Elastic-Plastic Finite Element Technique[J].International Journal of Mechanical Sciences,1985,27(11/12):829. |
| [12] | Liu C .Simulation of Strip and Slab Rolling Using an Elastic-Plastic Finite-Element Method[D].Birmingham:University of Birmingham,1985. |
| [13] | RU Zheng;PAN Xian-hua;DONG De-yuan et al.Experimental Study on the Distribution of Rolling Pressure in the Direction of the Plate Width[J].Journal of Northeast Institute of Heavy Machinery,1987,11(04):1. |
| [14] | LIU Hong-min;DUAN Zhen-yong;LIAN Jia-chuang .Comprehensive Experiment Study on the Force Parameters of Cold Strip Rolling[J].Journal of Northeast Institute of Heavy Machinery,1987,11(04):1. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%