By means of dynamic plastic deformation (DPD) followed by thermal annealing, a mixed structure of microsized austenite grains embedded with nano-scale twin bundles (of about 20% in volume) has been synthesized in a 316L stainless steel (SS). Such a 316L SS sample exhibits a tensile strength as high as 1001 MPa and an elongation-to-failure of about 23%. The much elevated strength originates from the presence of a considerable number of strengthening nano-twin bundles, while the ductility from the recrystallized grains. The superior strength-ductility combination achieved in the nano-twins-strengthened austenite steel demonstrates a novel approach for optimizing the mechanical properties in engineering materials.
参考文献
[1] | B.P. Kashyap .Towards interrelationship of grain size, cell parameters and flow stress in type 316L stainless steel[J].Acta materialia,2002(9):2413-2427. |
[2] | A.Kumar;T.Jayakumar;P.Palanichamy;B.Raj .Influence of grain size on ultrasonic spectral parameters in AISI type 316 stainless steel[J].Scripta materialia,1999(3):333-340. |
[3] | X.H. CHEN;J. LU;L. LU .Tensile properties of a nanocrystalline 316L austenitic stainless steel[J].Scripta materialia,2005(10):1039-1044. |
[4] | Y.S. Li;N.R. Tao;K. Lu .Microstructural evolution and nanostructure formation in copper during dynamic plastic deformation at cryogenic temperatures[J].Acta Materialia,2008(2):230-241. |
[5] | M. Eskandari;A. Najafizadeh;A. Kermanpur .Effect of strain-induced martensite on the formation of nanocrystalline 316Lstainless steel after cold rolling and annealing[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2009(1/2):46-50. |
[6] | Y.S. Li;Y. Zhang;N.R. Tao .Effect of thermal annealing on mechanical properties of a nanostructured copper prepared by means of dynamic plastic deformation[J].Scripta materialia,2008(4):475-478. |
[7] | Z.-H. Jin;P. Gumbsch;K. Albe .Interactions between non-screw lattice dislocations and coherent twin boundaries in face-centered cubic metals[J].Acta materialia,2008(5):1126-1135. |
- 下载量()
- 访问量()
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%