研究了攀钢新钢钒公司生产帘线钢72A过程中钢中氮含量变化对钢中TiN夹杂析出的影响。研究发现，随着钢中氮含量的升高，钢中析出的TiN夹杂数量变多，尺寸变大。热力学研究表明，在帘线钢中TiN一般只能在固相区形成，考虑元素偏析对凝固前沿元素富集的影响，凝固过程中TiN能在固液两相区析出。在帘线钢生产过程中，为了控制钢中TiN的析出，除了控制钛含量，控制钢中氮含量及氮偏析更加重要。理论计算结果表明，当钢中钛的质量分数控制在0.0003%~0.0005%区间时，将钢中氮的质量分数控制在0.0017%~0.0029%区间内能显著降低乃至杜绝帘线钢中TiN的析出。攀钢将帘线钢中钛、氮的质量分数分别控制在0.0005%以下和0.002%以下，显著减少了钢中TiN的析出，个别炉次中没有发现尺寸大于2μm的TiN夹杂。
Effects of N content in steel on precipitation of TiN inclusions during the production of 72A tire cord steel was investigated in Panzhihua New Steel Vanadium Co. Ltd. It is found that number of TiN precipitated in steel increases along with the increase of N content in steel, and TiN size becomes bigger. The results of thermodynamics study show that TiN inclusions can only form in solid phase area in tire cord steel without considering elements segregation. However, TiN inclusions can precipitate in solid-liquid two-phase area during solidification process with regarding effects of element segregation on element enrichment in solidification front. In order to restrain precipitation of TiN during production process of tire cord steel, controlling N content as well as N segregation is more important than control of Ti content. Theoretical calculation and test results indicate that controlling N content in the range of 0.0017% to 0.002% as well as controlling Ti content in the range of 0.0003% to 0.0005% can observably reduce or even eliminate precipitation of TiN in tire cord steel. Ti and N content in tire cord steel is controlled under 0.0005% and 0.002% respectively in Pangang plant, which dramaticlly reduces the precipitation of TiN in steel and resulted in none of TiN inclusion bigger than 2μm in some heats.
参考文献
| [1] | |
| [2] | 傅杰，朱剑. 微合金钢中TiN的析出规律研究[J]. 金属学报，2003，36(8)：801.[2] 蒋国昌. 纯净钢与二次精炼. 上海：上海科技出版社，1996.[3] Y Shinsho, T Nozaki. Influence of secondary steelmaking on occurrence of nonmetallic inclusion in high carbon steel for tire cord [J]. Wire Journal International, 1998 (9):145-153.[4] 蒋跃东，薛正良，吴杰. 82A钢凝固过程中TiN夹杂析出热力学和动力学. 武汉科技大学学报，2010，33(4)：358-362.[5] 杨俊，王新华，龚志祥. 超低氧车轮钢中TiN夹杂析出的热力学分析及控制. 北京科技大学学报，2010，32(9)：1138-1143.[6] 刘宏玉，李玉华，薛正良. 帘线钢中Ti夹杂物研究. 北京科技大学学报，2010，32(7)：866-871.[7] 陈家祥. 炼钢常用图表数据手册. 北京：冶金工业出版社，1984.[8] Turkdogan E T. Causes and effects of nitride and carbon nitride precipitation in HSLA steels in relation to continuous casting// Kennedy W. Steelmaking Conference Proceedings. New York: AIME, 1987: 399.[9] Sigworth G K, Elliott J F. The thermodynamics of liquid dilute iron alloys. Metal Science, 1974, 8(3): 98.[10] 黄希祜. 钢铁冶金原理. 北京: 冶金工业出版社, 2005.[11] Ohnake I. Mathematical analysis of solute redistribution during solidification with diffusion in solid phase. Trans Iron Steel Institute of Japan, 1986, 26:1045.[12] C. H. P. Lupis. Chemical thermodynamics of materials. New York: North-Holland, c1983.[13] Goto H , Miyazawa K , Yamada W, et al. Effect of cooling rate on composition of oxides precipitated during solidification of steels. ISIJ International, 1995, 35(6):708. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%