给出了多种纤维混杂多向缠绕筒三维等效弹性模量的理论估算方法,应用该方法计算了玻璃-碳纤维混杂缠绕筒的三维等效弹性模量。计及混杂效应的影响,考虑了碳纤维体积分数、铺层方式、纤维分散度等因素,对玻璃-碳纤维混杂缠绕结构,引入混杂效应系数对该方法进行修正。试验结果表明,该方法预测的三维等效弹性模量的精度较高。采用该方法可将复杂的纤维混杂缠绕结构等效为具有各向异性性质的均质单一材料,极大降低了应力分析的工作量。
A method was presented for estimating 3D effective elastic modulus of multidirectional filament-wound hybrid tube.The effective elastic modulus of glass-carbon fibre wound tube was calculated.In order to consider the influence of hybrid effects,the hybrid effect coefficient was introduced.The volume friction of carbon fibre,layered structure,fibre dispersion,etc were considerd for the glass-carbon winding structure.The test results show that effective elastic modulus based on the present method is accurate.The method can greatly reduce the size of problem for stress analysis,because complex structure can be equivalent to homogeneous anisotropic material.
参考文献
| [1] | Roy A K, Tsai S W. Three- dimensional effective moduli of orthotropic and symmetric laminates [J]. Journal of Applied Mechanics, Transactions ASME, 1992, 59(1): 39-47. |
| [2] | A1-Khalil M F S, Soden P D. Theoretical through-thickness elastic constants for filament-wound tubes [J]. International Journal of Mechanical Sciences, 1994, 36(1): 49-62. |
| [3] | HuGengkai, Bai Jinbo, Demianouchko E, Bompard P. Mechanical behaviour of ±55℃ filament - wound glass - fibre/ epoxy- resin tubesⅢ: Macromechanical model of the macroscopic behaviour of tubular structures with damage and failure envelope prediction [J]. Composites Science and Technology, 1998, 58(1), 19-29. |
| [4] | 刘文庆,姜秉元.对称复合材料层板弹性模量和泊松比的计算[J].宇航材料工艺,2003,33(3):53-56. |
| [5] | Xu Guanglei, Ruan Wenjun, Wang Hao. Three- dimensional effective elastic moduli for multidirectional filament- wound tube with lining [J]. Advanced Materials Research, 2011, 194 -196 : 1823-1829. |
| [6] | 张晓宏,宋焕成,张佐光.多向混杂纤维复合材料拉伸行为的研究[J].宇航材料工艺,1994,24(5):27-30. |
| [7] | 李卫东,曹海琳,刘毅佳,等.胶含量对CF/BF复合材料性能的影响[J].宇航材料工艺,2010,40(1):49-52. |
| [8] | 崔益华,NoruziaanB,LeeS,等.混杂型高模量高韧性复合材料加强筋[J].复合材料学报,2006,23(2):93-98. |
| [9] | 何芳,王玉林,万怡灶,等.三维编织超高分子量聚乙烯纤维/碳纤维/环氧树脂混杂复合材料力学行为及混杂效应[J].复合材料学报,2008,25(6):52-58. |
| [10] | 张剑,周储伟,雷笑,等.混杂CFRP/GFRP筋HPC梁的非线性梁壳组合单元研究[J].复合材料学报,2010,27(4):139-146. |
| [11] | 宋焕成,张佐光.混杂纤维复合材料的界面[J].北京航空航天大学学报,1990,16(4):17-21. |
| [12] | 宋焕成,邓浩,梁志勇.混杂纤维复合材料混杂效应的理论估算与实验[J].航空学报,1990,11(1):65-69. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%