为实现高品质低氧钢的生产，有效降低钢中全氧含量，在考虑转炉下渣、炉渣氧化性以及钢水氧活度影响的前提下，通过研究钢包渣改质技术、过程钢包渣氧化性控制技术以及相应的钢包底吹氩制度等精炼工艺，建立了转炉一连铸流程生产低氧钢的精炼工艺技术。采用该技术生产的高品质优特钢成品ω（[TO]）≤15×10。
In order to produce low oxygen steel with high quality, converter slag-tapping, slag oxidability and oxygen activity were analyzed. In addition, modifying and adding process of slag, control of slag oxidability and bottom argon-blowing in ladle were researched as well. On this basis, refining process which is good for low oxygen steel producing with converter-continuous casting process has been developed. The results show that ω（[TO]） in steel is not more than 15 × 10-6.
参考文献
| [1] | 张立峰 .洁净钢中杂质元素的控制[J].炼钢,1996,5(12):10. |
| [2] | 腾本英明.取锅加热精炼法の开发[J].铁と钢,1988(10):74. |
| [3] | 黄希枯.钢铁冶金原理[M].北京:冶金工业出版社,2000 |
| [4] | 赵保国,毛福来,汤潜,王立军.LF精炼造渣工艺研究[J].包钢科技,2003(z1):24-27. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%