The effect of the run-out table cooling patterns on the microstructure and mechanical properties of Nb microalloyed steel plates was investigated by hot rolling experiment. The results showed that the mixed microstrueture containing ferrite, bainite and significant amounts of retained austenite can be obtained through three kinds of cooling patterns on the run-out table under the same hot rolling condition. Three kinds of cooling patterns possess different austenite transformation kinetics, which leads to variations in microconstituent characteristics. The yield strength increases, the tensile strength decreases and the total elongation tends to increase as the cooling patterns Ⅰ , Ⅱ and Ⅲ were applied respectively. The yield strength, the total elongation and the product of tensile strength and ductility reach the maximum values （547 MPa, 37. 2% and 28 384 MPa% respectively） for the steel plate processed by cooling pattern Ⅲ.
参考文献
| [1] | Hashimoto S;Ikeda S;Sugimoto K;Miyake S .Effects of Nb and Mo addition to 0.2%C 1.5%Si 1.5%Mn steel on mechanical properties of hot rolled TRIP-aided steel sheets[J].ISIJ International,2004(9):1590-1598. |
| [2] | Zackay V F;Paker E R;Fahr D et al.The Enhancement of Ductility on High-Strength Steels [J3[J].Transactions ASM,1967,60:252. |
| [3] | M. De MEYER .The Influence of the Substitution of Si by Al on the Properties ofCold Rolled C-Mn-Si TRIP Steels[J].ISIJ International,1999(8):813-822. |
| [4] | Suh Dong woo;Park Seong-jun;Oh Chang-seok .Influence Of Partieal Replacement of Si by AI on the Change of Phase Fraction During Heat Treatment of TRIP Steels[J].Seripta Materialia,2007,57(12):1097. |
| [5] | Seung Chul BAIK;Seongju KIM;Young Sool JIN .Effects of Alloying Elements on Mechanical Properties and Phase Transformation of Cold Rolled TRIP Steel Sheets[J].ISIJ International,2001(3):290-297. |
| [6] | H. J. Koh;S. K. Lee;S. H. Park;S. J. Choi;S. J. Kwon;N. J. Kim .Effect of hot rolling conditions on the microstructure and mechanical properties of Fe-C-Mn-Si multiphase steels[J].Scripta materialia,1998(5):763-768. |
| [7] | WU Di;LI Zhuang .Effect of Thermomeehanical Controlled Processing on the Microstructure and Mechanical Properties of Fe-C-Mn Si Multiphase Steels[J].ISIJ International,2006,46(07):1059. |
| [8] | A. J. DeArdo .Niobium in modern steels[J].International Materials Reviews,2003(6):371-402. |
| [9] | M.PRIKRYL;A. KROUPA .Precipitation Behavior in a Medium Carbon, Ti-V-N Microalloyed Steel[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,1996(5):1149-1165. |
| [10] | John D Verboeven.Fundamentals of Physical Metallurgy[M].John Wiley and Sons,Inc,1975 |
| [11] | Imao Tamura;Hiroshi Sekine;Tomo Tanaka.Thermomechanical Processing of High-Strength Low Alloy Steels[M].London:butterworth,1988 |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%