在Gleeble-1500D热模拟试验机上通过高温等温压缩试验,对Cu-0.4Cr-0.15Zr-0.05Ce合金在应变速率为0.01 ～5 s-1、变形温度为600 ～800℃的动态再结晶行为以及组织转变进行了研究.结果表明:流变应力随变形温度的升高而减小,随应变速率的提高而增大.同时从流变应力、应变速率和温度的相关性,得出了该合金高温热压缩变形时的热变形激活能Q为495.8 kJ/mol,同利用逐步回归的方法建立了该合金的流变应力方程.利用光学显微镜分析了形变温度对该合金在热压缩过程中的组织演变及动态再结晶形核机制的影响规律.
参考文献
| [1] | Kang BX;Cao XG;Huang JL;Yen B;Gu HC;Liu P .Aging precipitation and recrystallization of rapidly solidified Cu-Cr-Zr-Mg alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1999(1/2):262-267. |
| [2] | Suzuki S;Shibutani N;Mimura K et al.Improvement in strength and electrical conductivity of CuNiSi alloy by aging and cold rolling[J].Journal of Alloys and Compounds,2006,417(1-2):116-120. |
| [3] | 田保红,刘平,宋克兴,刘勇,任凤章,李炎,董企铭.纳米Al2O3p/CU复合材料的再结晶微观结构分析[J].材料热处理学报,2005(05):10-13. |
| [4] | 雷静果,刘平,赵冬梅,康布熙,田保红.用导电率研究Cu-Ni-Si-Cr合金时效早期相变动力学[J].材料热处理学报,2003(04):22-26. |
| [5] | 申玉田,崔春翔,徐艳姬,孟凡斌,王如.Cu-Al2O3复合材料的高温塑性变形[J].材料研究学报,2001(06):610-614. |
| [6] | 张红钢,张辉,刘婉容,林启权,林高用,彭大暑.C194铜合金热压缩变形流变应力[J].湘潭大学自然科学学报,2003(03):82-86. |
| [7] | M. Rajamuthamilselvan;S. Ramanathan .Hot deformation behaviour of 7075 alloy[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2011(3):948-952. |
| [8] | Huizhong Li;Zhou Li;Min Song;Xiaopeng Liang;Feifei Guo .Hot deformation behavior and microstructural evolution of Ag-containing 2519 aluminum alloy[J].Materials & design,2010(4):2171-2176. |
| [9] | Momeni, A.;Dehghani, K. .Characterization of hot deformation behavior of 410 martensitic stainless steel using constitutive equations and processing maps[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2010(21/22):5467-5473. |
| [10] | Nengping Jin;Hui Zhang;Yi Han .Hot deformation behavior of 7150 aluminum alloy during compression at elevated temperature[J].Materials Characterization,2009(6):530-536. |
| [11] | E. Cerri;P. Leo;P. P. De Marco .Hot compression behavior of the AZ91 magnesium alloy produced by high pressure die casting[J].Journal of Materials Processing Technology,2007(1/3):97-106. |
| [12] | Hamed Mirzadeh;Jose Maria Cabrera;Abbas Najafizadeh .Constitutive relationships for hot deformation of austenite[J].Acta materialia,2011(16):6441-6448. |
| [13] | Deng, Y.;Yin, Z.;Huang, J. .Hot deformation behavior and microstructural evolution of homogenized 7050 aluminum alloy during compression at elevated temperature[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2011(3):1780-1786. |
| [14] | Z. Gronostajski .The deformation processing map for control of microstructure in CuAl9.2Fe3 aluminium bronze[J].Journal of Materials Processing Technology,2002(0):119-124. |
| [15] | 王明家,龙珊珊,王子兮.Cr-Zr-Cu合金热变形力学行为及热加工图[C].中国有色金属学会第七届学术年会论文集,2008:543-548. |
| [16] | Mu S G;Guo F A;Tang Y Q et al.Study on the microstructure and properties of the aged Cu-Cr-Zr-Mg-RE alloy[J].Materials Science and Engineer A,2008,475(1-2):235-240. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%