采用电子背散射衍射(EBSD)、显微硬度和电子通道衬度像(ECC)等方法研究了一种Al-Mn合金的均匀化制度对随后的再结晶过程的影响.结果表明,合金的再结晶动力学和再结晶织构取决于最初的均匀化工艺,退火过程中同时产生的析出相与再结晶有强烈的相互作用.经过双级均匀化(620℃/10 h+440℃/12 h)处理的合金的再结晶温度比经单级均匀化(620℃/10 h)处理的明显降低;单级均匀化处理析出的析出相对晶界迁移有较强的钉扎作用,再结晶后晶粒形貌与双级均匀化处理样品有很大差异;文章最后讨论了均匀化工艺对再结晶织构的影响.
参考文献
| [1] | Pizhi Zhao;Xinglin Chen;Wei Chen;Yonghao Zhang.EFFECT OF HOMOGENIZATION TREATMENT CONDITIONS ON THE RECRYSTALLIZATION BEHAVIOR OF AL-1.2MN ALUMINUM ALLOY SHEETS[J].Light metals,2013:341-346. |
| [2] | Smith C S .Grains,phase,and interfaces:an interpretation of microstructure[J].Transactions of the American Institute of Mining and Metallurgical Engineers,1948,175:15-51. |
| [3] | Recrystallization behavior of a supersaturated Al-Mn alloy[J].Materials Letters,2010(16):P.1829. |
| [4] | JIANTAO LIU;JAMES G. MORRIS .Recrystallization Textures of Continuous Cast AA 3015 Alloy: Development of the P Orientation {011}<566>[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2003(9):2029-2032. |
| [5] | JIANTAO LIU;S.W. BANOVIC;R.J. FIELDS .Effect of Intermediate Heat Treatment on Microstructure and Texture Evolution of Continuous Cast Al-Mn-Mg Alloy Sheet[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2006(6):1887-1898. |
| [6] | Somerday M;Humphreys F J .The effect of dispersoids on the recrystallization behavior of a high-purity Al-1.3 Mn alloy[J].Materials Science Forum,2000,331-337(2):703-714. |
| [7] | Somerday M;Humphreys F J .Recrystallisation behaviour of supersaturated Al-Mn alloys-Part 1-Al-1.3 wt％ Mn[J].Materials Science and Technology,2003,19(1):20-29. |
| [8] | Stian Tangen;Knut Sjolstad;Erik Nes .The Effect of Precipitation on the Recrystallization Behavior of a Supersaturated, Cold Rolled AA3103 Aluminium Alloy[J].Materials Science Forum,2002(Pt.1):469-474. |
| [9] | Birol Y .Reerystallization of a supersaturated Al-Mn alloy[J].Scripta Materialia,2008,59(6):611-614. |
| [10] | S. TANGEN;K. SJOLSTAD;T. FURU;E. NES .Effect of Concurrent Precipitation on Recrystallization and Evolution of the P-Texture Component in a Commercial Al-Mn Alloy[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2010(11):2970-2983. |
| [11] | W.C. LIU;J.G. MORRIS .Evolution of Recrystallization and Recrystallization Texture in Continuous-Cast AA 3015 Aluminum Alloy[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2005(10):2829-2848. |
| [12] | Sun NY;Patterson BR;Suni JP;Simielli EA;Weiland H;Allard LF .Microstructural evolution in twin roll cast AA3105 during homogenization[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2006(1-2):232-239. |
| [13] | 刘建文,涂益友,张敏达,张建军,蒋建清.均匀化处理对AA3003铝合金铸轧板再结晶组织的影响[J].材料热处理学报,2010(03):107-111. |
| [14] | Nes E .Effect of a fine particle dispersion on heterogeneous recrystallization[J].ACTA METALLURGICA,1976,24(5):391-398. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%