采用环状对苯二甲酸丁二醇酯（CBT）原位聚合制备了连续玻璃纤维（GF）增强聚环状对苯二甲酸丁二醇酯（PCBT）复合材料。考察了聚合反应中催化剂用量对PCBT结晶度以及GF/PCBT复合材料力学性能的影响。当催化剂用量为0.5%（质量分数）时,PCBT的结晶度为53%,GF/PCBT的力学性能达到最佳,拉伸强度为522MPa,拉伸模量为27GPa,弯曲强度为481MPa,弯曲模量为24.8GPa,层间剪切强度（ILSS）为43MPa。SEM观察表明,发现催化剂用量为0.5%时,树脂与纤维的结合性较好。进一步研究了淬火和退火后处理对复合材料力学性能的影响。发现复合材料退火处理后具有较好的力学性能,其中拉伸强度为545MPa,弯曲强度为495MPa。
Continuous glass fiber（GF） reinforced poly（cyclic butylene terephthalate）（PCBT） composites were prepared via in-situ polymerization of cyclic butylene terephthalate（CBT）.The effects of the catalyst contents on the crystallinity and the mechanical properties of GF/PCBT composites were studied.When the catalyst mass fraction reaches 0.5%,the crystallinity is 53% and the GF/PCBT composites show the highest values of mechanical properties,tensile strength 522 MPa,tensile modulus 27 GPa,flexural strength 481 MPa,flexural modulus 24.8 GPa and interlaminar shear strength（ILSS） 43 MPa.The SEM results show good bonding quality between the fiber and the matrix at 0.5% of catalyst.The effects of quenching and annealing treatments on the mechanical properties of GF/PCBT composites were further investigated.The results show that the improved mechanical properties after annealing treatment,tensile strength is 545 MPa and flexural strength is 495 MPa.
参考文献
| [1] | Wakeman M D, Rudd C D. Compression molding of thermoplastic composites [ M]//Kelly Anthony. Comprehensive Composite Materials. Oxford: Elsevier Science Ltd, 2000: 915-963. |
| [2] | Gibson A G. Continuous molding of thermoplastic composites [M]//Kelly Anthony. Comprehensive Composite Materials. Oxford: Elsevier Science Ltd, 2000: 979-998 |
| [3] | Manson J A E, Wakeman M D, Bernet N. Composite processing and manufacturing: An overview [M] // Kelly Anthony. Comprehensive Composite Materials. Oxford Elsevier Science Ltd, 2000: 577-607 |
| [4] | Pang K, Kotek R, Tonelli A. Review of conventional and novel polymerization processes for polyesters [J]. Progress in Polymer Science, 2006, 31(11) : 1009-1037. |
| [5] | Wunderlich B. Crystallization during polymerization [J]. Advanced Polymer Science, 1968, 5(1): 568-619. |
| [6] | Parton H. Characterisation of the in situ polymerisalion process for continuous fibre reinforced thermoplastics [ D ]. Belgium: Katholieke Universiteit Leuven, 2006. |
| [7] | Ishak Z A M, Shang P P, Karger Kocsis J. A modulated DSC study on the in situ polymerization of cyclic butylene terephthalate oligomers [J]. Journal of Thermal Analysis and Calorimetry, 2006, 84(3): 637-641. |
| [8] | Ishak Z A M, Leong Y W, Steeg M, Karger Kocsis J. Mechanical properties of oven glass fabric reinforced in situ polymerized poly (butylene terephthalate) omposites [J]. Composites Science and Technology, 2007, 67(3/4): 390-398. |
| [9] | Samperi Filippo, Puglisi Coneetto, Alicata Rossana, Montaudo Giorgio. Thermal degradation of poly (butylene terephthalate) at the processing temperature[J]. Polymer Degradation and Stability, 2004, 83(1): 11-17. |
| [10] | Mark James E. Polymer data handbook [M]. Oxford: Oxford University Press, 1999 : 439-441. |
| [11] | Brunelle D J, Bradt E J, Serth Guzzo J, Takekoshi T, Evans T L, Pearce E J, Wilso P R. Semicrystalline polymers via ring-opening polymerization: Preparation and polymerization of alkylene phthalate cyclic oligomers[J]. Macromolecules. 1998, 31(15): 4782-4790 |
| [12] | 江云涛,黄佃平,邵华锋,姚薇,黄宝琛.结晶度对聚丁烯-1力学性能的影响[J].现代塑料加工应用,2008,20(1):26-29. |
| [13] | 洪月蓉,张玲,牛建华,张天水,李春忠.弹性体修饰纳米SO2粒子改性PBT[J].复合材料学报,2009,26(3):55-59. |
| [14] | 张翔,李玉宝,左奕,吕国玉.加工工艺对n-HA/PA66复合材料结晶行为和力学性能的影响[J].复合材料学报,2007,24(3):72-77. |
| [15] | 樊在霞,张瑜,陈彦模.冷却方式对GF/PP复合纱针织物复合材料拉伸性能的影响[J].玻璃钢/复合材料,2007(1):13-15 |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%