采用射频磁控溅射法在ITO/Corning1737玻璃基片上制备了用于无机EL绝缘层厚约700nm的Ba0.5Sr0.5TiO3介电薄膜,研究了沉积温度和退火处理对薄膜介电性能的影响.实验表明,随着沉积温度的升高,薄膜的介电常数、介电损耗、正反向漏电流密度增加,击穿场强下降.对于在500℃下沉积的薄膜在550~700℃、1.8×10-2Pa氧气氛中进行30min退火处理,结果发现在550℃和600℃下热处理介电损耗有所改善,其它参数都劣化;在650℃和700℃下热处理介电常数显著增加,其它性能都变差.
参考文献
[1] | LIN Ming-Tong,CHEN Guo-Rong,YANG Yun-Xia,XIAO Tian,XU Yi,LOU Jun-Hui,CHEN Chen-Xi.Dielectric Properties of Multilayered Ba0.5Sr0.5TiO3 Thin Films Deposited on ITO-Coated Corning 1737 Glass by rf Magnetron Sputtering[J].中国物理快报(英文版),2005(11):2947-2949. |
[2] | Jin HZ.;Zhu J.;Ehrhart P.;Fitsilis F.;Jia CL.;Regnery S.;Urban K. Waser R. .An interfacial defect layer observed at (Ba,Sr)TiO3/Pt interface[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2003(1/2):282-285. |
[3] | 赵莉,杨传仁,冷文建,陈宏伟,符春林,廖家轩,高志强.退火工艺对钛酸锶钡薄膜结构的影响[J].电子元件与材料,2004(10):17-19. |
[4] | Huang SC.;Wu SC.;Lee JYM.;Chen HM. .Time dependent dielectric breakdown of paraelectric barium-strontium-titanate thin film capacitors for memory device applications[J].Journal of Applied Physics,1998(9):5155-5157. |
[5] | Samantaray CB.;Dhar A.;Mukherjee ML.;Bhattacharya D.;Ray SK. .RF magnetron sputtered high-k barium strontium titanate thin films on magnetoresistive La0.7Ca0.3MnO3 electrode[J].Materials Science & Engineering, B. Solid-State Materials for Advanced Technology,2002(1):14-17. |
[6] | 王小宁,刘建设,任天令,赵宏锦,邵天奇,刘理天.应用于DRAM的BST薄膜制备与性能研究[J].压电与声光,2002(06):459-462. |
[7] | 孙晓峰,姜斌,蒋书文,张鹰,王恩信,李燕,黄文.钛酸锶钡(BST)薄膜晶化过程研究[J].材料导报,2004(10):82-84. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%