以环氧树脂E-51、甲基纳迪克酸酐、聚乙二醇为原料合成了反应型乳化剂,最佳工艺条件是酯化反应时间为3h,温度为75℃;环氧开环反应时间为5h,温度为100℃.通过相反转法制备出水性环氧树脂乳液,并调节配方得到水性环氧地坪面漆,该漆膜性能优异.
参考文献
| [1] | P.Bartolomeo;J.F.Chailan;J.L.Vernet .Curing of cyanate ester resin: a novel approach based on FTIR spectroscopy and comparison with other techniques[J].European Polymer Journal,2001(4):659-670. |
| [2] | Karayannidou EG;Achilias DS;Sideridou ID .Cure kinetics of epoxy-amine resins used in the restoration of works of art from glass or ceramic[J].European Polymer Journal,2006(12):3311-3323. |
| [3] | Zhang DH;Jia DM .Toughness and strength improvement of diglycidyl ether of bisphenol-A by low viscosity liquid hyperbranched epoxy resin[J].Journal of Applied Polymer Science,2006(4):2504-2511. |
| [4] | Robert W. Corkery;Irena A. Blute;Stig E. Friberg .Emulsion Inversion in the PIT Range: Quantitative Phase Variations in a Two-Phase Emulsion[J].Journal of Chemical and Engineering Data: the ACS Journal for Data,2010(10):4471-4475. |
| [5] | 陈俊芳,李素芳,从洪云,黄娟萍,李娇.水性环氧乳液的研制及性能研究[J].涂料工业,2011(08):46-49. |
| [6] | SHER L E;DUAN X W;JEFFERY L et al.Droplet size and stability of nano-emulsions produced by the temperature phase inversion method[J].CHEMICAL ENGINEERING JOURNAL,2008,140(1-3):626-613. |
| [7] | 黄凯,梁亮,李丹,闵绍进,蒋晨.非离子型自乳化水性环氧树脂乳液的研制[J].涂料工业,2010(09):53-57. |
| [8] | 李亮,王平华,刘春华,周莹莹,毛小凤.水性环氧树脂的制备及表征[J].涂料工业,2011(02):17-20. |
| [9] | 陈平;刘胜平;王德中.环氧树脂及其应用[M].北京:化学工业出版社,2013 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%