欢迎登录材料期刊网

材料期刊网

高级检索

采用实验的方法,在鼓泡流化床燃烧装置中研究了低浓度煤层气在床内的流动和燃烧特性,考察了床层温度、气体浓度、流化风速及床料颗粒特性等操作条件变化对甲烷转化率和燃烧产物的影响.研究表明:床层温度升高,甲烷转化率显著增加;增加流化风速及进气甲烷浓度,甲烷转化率减小;颗粒粒径增加,甲烷转化率增加;CO排放浓度随床层温度的升高先增加后降低,并在床层温度约850℃时达到其最大峰值,沿流化床轴向高度CO的排放浓度先增加后降低,呈钟型分布.

参考文献

[1] 王怀勐,朱炎铭,李伍,张建胜,罗跃.煤层气赋存的两大地质控制因素[J].煤炭学报,2011(07):1129-1134.
[2] Mario Iamarino;Paola Ammendola;Riccardo Chirone;Raffaele Pirone;Giovanna Ruoppolo;Gennaro Russo .Nonpremixed Catalytic Combustion of Methane in a Fluidized Bed Reactor[J].Industrial & Engineering Chemistry Research,2006(3):1009-1013.
[3] Zukowski W. .The role of two-stage combustion in the development of oscillations during fluidized bed combustion of gases[J].Fuel,2000(14):1757-1765.
[4] S. Dounit;M. Hemati;R. Andreux .Modelling and experimental validation of a fluidized-bed reactor freeboard region: Application to natural gas combustion[J].Chemical engineering journal,2008(1/3):457-465.
[5] Stanislav Jaso;Harvey Arellano-Garcia;Gunter Wozny .Oxidative coupling of methane in a fluidized bed reactor: Influence of feeding policy, hydrodynamics, and reactor geometry[J].Chemical engineering journal,2011(1):255-271.
[6] Rahmat Sotudeh-Gharebagh;Jamal Chaouki .The Heterogeneous and Homogeneous Combustion of Methane Over Inert Particles[J].The Canadian Journal of Chemical Engineering,2003(6):1182-1191.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%