为研究退火工艺对普通取向硅钢初次再结晶组织的影响,对经不同温度、保温时间和升温速率退火后的材料组织进行了分析.结果表明:在等温退火条件下,加热至600℃时开始发生初次再结晶,800℃以上初次再结晶组织发展完善;而在最终冷轧板直接进行最终高温退火的情况下,加热温度在500～700℃时,将升温速率提高到80℃/h,初次再结晶组织更易于发展完善.
参考文献
| [1] | Jae Young Park;Kyu Seok Han;Jong Soo Woo .Influence of primary annealing condition on texture development in grain oriented electrical steels[J].Acta materialia,2002(7):1825-1834. |
| [2] | Dong Nyung Lee;Hyo Tae Jeong .The evolution of the Goss texture in silicon steel[J].Scripta Materialia,1998,38(08):1219-1223. |
| [3] | Dorothe Dorner;Stefan Zaefferer;Ludger Lahn et al.Overview of microstructure and microtexture development in grain-oriented silicon steel[J].Journal of Magnetism and Magnetic Materials,2006,304:183-186. |
| [4] | Y. Hayakawa;M. Kurosawa .Orientation relationship between primary and secondary recrystallized texture in electrical steel[J].Acta materialia,2002(18):4527-4534. |
| [5] | 何忠治.电工钢[M].北京:冶金工业出版社,1996:23. |
| [6] | I.Samajdar;S.Cicale;B.Verlinden et al.Primary recrystallization in a grain oriented silicon steel:on the origin of goss { 110 } 〈 001 〉 grains[J].Scripta Materialia,1998,39(08):1083-1088. |
| [7] | 余永宁.金属学原理[M].北京:冶金工业出版社,2000:447. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%