首先通过拉伸试验,得到了镍涂层薄钢板和低碳钢薄板的材料参数,然后利用有限元软件Abaqus/Explicit对镍涂层薄钢板的冲压成形过程进行了有限元模拟,得到了涂层和基体在冲压变形过程中的应力、应变以及断裂的初始位置及厚度分布,并通过Oyane韧性断裂准则预测了镍涂层薄钢板的成形极限;并将韧性断裂准则的理论计算、试验结果与有限元计算结果进行对比.结果表明:Oyane韧性断裂准则能够较好地预测镍涂层薄板的成形极限和失效的初始位置,预测值与试验值相差较小.
参考文献
| [1] | 权国政,王凤彪,刘莹莹,石彧,周杰.7075铝合金的变化型临界损伤因子[J].中国有色金属学报（英文版）,2013(03):749-755. |
| [2] | Tong Hui,Yiheng Chen.SURFACE EFFECT ON NANOSIZED VOID GROWTH IN A RIGID-PERFECTLY PLASTIC MATERIAL[J].固体力学学报（英文版）,2008(01):9-14. |
| [3] | Liu Hongsheng;Yang Yuying;Yu Zhongqi;Sun Zhenzhong;Wang Yongzhi .The application of a ductile fracture criterion to the prediction of the forming limit of sheet metals[J].Journal of Materials Processing Technology,2009(14):5443-5447. |
| [4] | Y. S. Lee;M. C. Kim;S. W. Kim;Y. N. Kwon;S. W. Choi J. H. Lee .Experimental and analytical studies for forming limit of AZ31 alloy on warm sheet metal forming[J].Journal of Materials Processing Technology,2007(0):103-107. |
| [5] | 于忠奇 .基于LEMAITRE损伤理论的韧性断裂准则建立及板料成形极限预测[D].哈尔滨工业大学,2003. |
| [6] | Li, H.;Fu, M.W.;Lu, J.;Yang, H. .Ductile fracture: Experiments and computations[J].International Journal of Plasticity,2011(2):147-180. |
| [7] | 虞松,陈军,阮雪榆.韧性断裂准则的试验与理论研究[J].中国机械工程,2006(19):2049-2052. |
| [8] | LI Yu-ping,ZHOU Li-qun,ZHOU Yi-chun.Elastic-plastic solution to stamping thin strip on elastic foundation[J].中国有色金属学会会刊（英文版）,2006(02):339-345. |
| [9] | J. Jackiewicz .Use of a modified Gurson model approach for the simulation of ductile fracture by growth and coalescence of microvoids under low, medium and high stress triaxiality loadings[J].Engineering Fracture Mechanics,2011(3):487-502. |
| [10] | 唐建国 .电沉积镍涂层薄板的冲压成形极限预测与数值模拟[D].湘潭大学,2009. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%