采用Gleeble-1500D热模拟试验机,对Cu-Ni-Si-Cr合金在变形温度为600～800℃、应变速率为0.01～5 s-1条件下的动态再结晶行为以及组织转变进行了研究,分析了实验合金在高温变形时的流变应力和应变速率及变形温度之间的关系,并研究了在热压缩过程中组织的变化.结果表明:应变速率和变形温度的变化强烈地影响合金流变应力的大小,流变应力随变形温度升高而降低,随应变速率提高而增大,材料显微组织强烈受到变形温度的影响.
参考文献
| [1] | Kang BX;Cao XG;Huang JL;Yen B;Gu HC;Liu P .Aging precipitation and recrystallization of rapidly solidified Cu-Cr-Zr-Mg alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1999(1/2):262-267. |
| [2] | Virtanen P;Tiainen T .Stress relaxation behaviour in bending of high strength copper alloys in the Cu-Ni-Sn system[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,1997,238:407-410. |
| [3] | Suzuki S;Shibutani N;Mimura K et al.Improvement in strength and electrical conductivity of CuNiSi alloy by aging and cold rolling[J].Journal of Alloys and Compounds,2006,417:116-120. |
| [4] | 雷静果,刘平,赵冬梅,康布熙,田保红.用导电率研究Cu-Ni-Si-Cr合金时效早期相变动力学[J].材料热处理学报,2003(04):22-26. |
| [5] | Su JH;Dong QM;Liu P;Li HJ;Kang BX .Research on aging precipitation in a Cu-Cr-Zr-Mg alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):422-426. |
| [6] | V. T. Witusiewicz;I. Arpshofen;H. J. Seifert .Enthalpy of mixing of liquid and undercooled liquid ternary and quaternary Cu-Ni-Si-Zr alloys[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2002(1/2):155-167. |
| [7] | V.V. Kokorin;L.E. Kozlova;A.N. Titenko .Temperature hysteresis of martensite transformation in aging Cu-Mn-Al alloy[J].Scripta materialia,2002(8):499-502. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%