欢迎登录材料期刊网

材料期刊网

高级检索

在三维全五向(Q5D)编织复合材料细观结构模型的基础上,建立了其单胞参数化有限元模型.通过施加合理的边界条件,计算得到了Q5D编织复合材料的弹性常数、热传导系数和热膨胀系数,所得结果与现有的实验数据吻合较好.在此基础上,深入研究了纤维体积分数、编织角等工艺参数对材料弹性性能和热物理性能的影响规律,并将计算结果与三维四向(4D)和三维五向(5D)编织复合材料的相应结果进行了对比.结果表明,Q5D编织复合材料具有较好的力学性能和纵向导热性能,其零膨胀结构的可设计性更强,为进一步研究此种结构材料的强度问题和热力耦合问题奠定了基础.

参考文献

[1] 刘振国.三维全五向编织预型件的概念[J].材料工程,2008(S1):305-312.Liu Zhenguo.Concept of three-dimentional all five-directional braided preforms[J].Materials Science and Engineering,2008(S1):305-312.
[2] Zhang F,Liu Z G,Wu Z H,et al.A new scheme and microstructural model for 3D full 5-directional braided composites[J].Chinese Journal of Aeronautics,2010,23(1):61-67.
[3] 皮秀标,钱坤,曹海建,等.三维全五向编织复合材料的细观结构分析[J].宇航材料工艺,2011,41(6):39-43.Pi Xiubiao,Qian Kun,Cao Haijian,et al.Microstructure analysis of 3D full 5 directional braided composites[J].Aerospace Materials and Technology,2011,41(6):39-43.
[4] 李典森,刘子仙,卢子兴.三维五向碳/酚醛编织复合材料的压缩性能及破坏机理[J].复合材料学报,2008,25(1):133139.Li Diansen,Liu Zixian,Lu Zixing.Compressive properties and failure mechanism of three-dimensional and five-directional carbon/phenolic braided composites[J].Acta Materiae Compositae Sinica,2008,25(1):133-139.
[5] 庞宝君,杜善义,韩杰才,等.三维四向编织碳/环氧复合材料实验研究[J].复合材料学报,1999,16(4):136-141.Pang Baojun,Du Shanyi,Han Jiecai,et al.An experimental investigation of three-dimensional and four-directional braided carbon/epoxy composites[J].Acta Materiae Compositae Sinica,1999,16(4):136-141.
[6] 李王波,矫桂琼,潘文革.三维编织C/SiC复合材料的拉压实验研究[J].复合材料学报,2004,21(3):110-114.Li Wangbo,Jiao Guiqiong,Pan Wen'ge.Tensile and compress experimental investigation of three-dimensionally braided C/SiC composites[J].Acta Materiae Compositae Sinica,2004,21 (3):110-114.
[7] 李典森,卢子兴,卢文书.三维四向编织复合材料刚度和强度的理论预测[J].应用数学和力学,2008,29(2):149-156.Li Diansen,Lu Zixing,Lu Wenshu.Theoretical prediction of the stiffness and strength of three dimensional and fourdirectional braided composites[J].Applied Mathematics and Mechanics,2008,29(2):149-156.
[8] 卢子兴,杨振宇,李仲平.三维编织复合材料力学行为研究进展[J].复合材料学报,2004,21(2):1-7.Lu Zixing,Yang Zhenyu,Li Zhongping.Development of investigation into mechanical behavior of three-dimensional braided composites[J].Acta Materiae Compositae Sinica,2004,21(2):1-7.
[9] Mouritza A P,Bannisterb M K,Falzonb P J,et al.Review of applications for advanced three-dimensional fiber textile composites[J].Composites:Part A,1999,30(12):1445-1461.
[10] Yang J M,Ma C L,Chou T W.Fiber inclination model of three-dimensional textile structural composites[J].Journal of Composite Materials,1986,20(5):472-484.
[11] 卢子兴,刘子仙.三维五向编织复合材料的弹性性能[J].北京航空航天大学学报,2006,32(4):455-460.Lu Zixing,Liu Zixian.Elastic properties for 3 dimensional and 5 directional braided composites[J].Journal of Beijing University of Aeronautics and Astronautics,2006,32(4):455-460.
[12] 程伟,赵寿根,刘振国,等.三维四向编织复合材料等效热特性数值分析和试验研究[J].航空学报,2002,23(2):102-105.Cheng Wei,Zhao Shougen,Liu Zhenguo,et al.Thermal property of 3-D braided fiber composites experimental and numerical results[J].Acta Aeronautica et Astronautica Sinica,2002,23(2):102-105.
[13] Liu Z G,Zhang H G,Lu Z X.Investigation on the thermal conductivity of 3-dimensional and 4-directional braided composites[J].Chinese Journal of Aeronautics,2007,20(4):327-331.
[14] Soheil M.Predictions for coefficients of thermal expansion of three dimensional braided composites[J].AIAA Journal,1997,35(1):141-144.
[15] 夏彪,卢子兴.三维编织复合材料热物理性能的有限元分析[J].航空学报,2011,32(6):1040-1049.Xia Biao,Lu Zixing.Finite element analysis on thermophysical properties of 3D braided composites[J].Acta Aeronautica et Astronautica Sinica,2011,32(6):1040-1049.
[16] 陈利,徐正亚.三维五向编织复合材料中纱线截面形状实验分析[J].复合材料学报,2007,24(4):128-132.Chen Li,Xu Zhengya.Experimental analysis on the yarns section of three-dimensional and five-directional braided composites[J].Acta Materiae Compositae Sinica,2007,24(4):128-132.
[17] Li D S,Lu Z X,Chen L,et al.Microstructure and mechanical properties of three-dimensional five-directional braided composites[J].International Journal of Solids and Structures,2009,46(18/19):3422-3432.
[18] 李嘉禄,刘谦.三维编织复合材料中纤维束横截面形状的研究[J].复合材料学报,2001,18(2):9-13.Li Jialu,Liu Qian.Study on fiber tows cross sect ion in 3-D braided composites[J].Acta Materiae Compositae Sinica,2001,18(2):9-13.
[19] Chamis C C.Mechanics of composites materials:Past,present and future[J].Journal of Composites Technology and Research,1989,11(1):3-14.
[20] 李典森,卢子兴,刘振国,等.三维五向编织复合材料导热性能的有限元分析[J].航空动力学报,2008,23(8):1455-1460.Li Diansen,Lu Zixing,Liu Zhenguo,et al.Finite element analysis of thermal conductivity of three-dimensional and five directional braided composites[J].Journal of Aerospace Power,2008,23(8):1455-1460.
[21] Bowles D E.Tnmpkins S S.Prediction of coefficients of thermal expansion for unidirectional conposites[J].Journal of Composite Materials,1989,23:371-388.
[22] Rao M V,Mahajan P,Mittal R K.Effect of architecture on mechanical properties of carbon/carbon composites[J].Composite Structures,2008,83(2):131-142.
[23] 李典森,刘子仙,卢子兴,等.三维五向编织复合材料弹性性能的数值预报[J].北京航空航天大学学报,2008,34(8):891-895.Li Diansen,Liu Zixian,Lu Zixing,et al.Numerical prediction for the elastic properties of three dimensional and five directional braided composites[J].Journal of Beijing University of Aeronautics and Astronautics,2008,34(8):891-895.
[24] Xia Z H,Zhang Y F,Fernand E.A unified periodical boundary conditions for representative volume elements of composites and applications[J].International Journal of Solid & Structure,2003,40(8):1907-1921.
[25] Xia Z H,Zhou C W,Yong Q L,et al.On selection of repeated unit cell model and application of unified periodic boundary conditions in micro-mechanical analysis of composites[J].International Journal of Solid & Structure,2006,43(2):266-278.
[26] 黄雨霓.三维编织复合材料力学性能研究[D].北京:北京航空航天大学,2012.Huang Yuni.Research on the mechanical properties of three dimensional braided composites[D].Beijing:Beihang University,2012.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%