针对超高分子量聚乙烯(UHMWPE)成型加工中存在的熔融缺陷问题,通过在不同加工条件下对超高分子量聚乙烯进行模压成型,研究熔融缺陷的形成及对制品力学性能的影响.采用对制品进行扫描电镜(SEM)断面形貌观察、力学拉伸和差示扫描量热(DSC)测试,结果发现,延长加工时间或提高加工温度,UHMWPE的结晶行为无明显变化,但都能够有效地改善超高分子量聚乙烯的熔融缺陷,能提高制品的断裂强度和断裂韧性等力学性能.
参考文献
| [1] | Olley RH;Hosier IL;Bassett DC;Smith NG .On morphology of consolidated UHMWPE resin in hip cups.[J].Biomaterials,1999(21):2037-2046. |
| [2] | Rezaei M;Ebrahimi NG;Kontopoulou M .Thermal properties, rheology and sintering of ultra high molecular weight polyethylene and its composites with polyethylene terephthalate[J].Polymer engineering and science,2005(5):678-686. |
| [3] | Fang L;Leng Y;Gao P .Processing and mechanical properties of HA/UHMWPE nanocomposites.[J].Biomaterials,2006(20):3701-3707. |
| [4] | Gai, JG;Li, HL;Schrauwen, C;Hu, GH .Dissipative particle dynamics study on the phase morphologies of the ultrahigh molecular weight polyethylene/polypropylene/poly(ethylene glycol) blends[J].Polymer,2009(1):336-346. |
| [5] | Parasnis NC.;Ramani K. .Analysis of the effect of pressure on compression moulding of UHMWPE[J].Journal of Materials Science. Materials in Medicine,1998(3):165-172. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%