将质量比为1:1的TiB2硬质相和Co粘结相通过机械合金化球磨方式制备TiB2-50Co金属陶瓷复合粉末,将所获得的复合粉末通过超音速火焰喷涂技术在Q235钢基体表面制备TiB2-50Co金属陶瓷涂层,研究不同球磨时间粉末颗粒的组织结构,采用XRD分析TiB2-50Co金属陶瓷粉末与涂层的物相,研究涂层组织结构、耐磨损和耐熔融铝硅腐蚀性能.结果表明,TiB2硬质相与Co粘结相界面结合良好,当随着球磨时间的延长,Co粘结相塑变成长条形,复合粉末颗粒TiB2硬质相与Co粘结相呈层状结构.涂层组织较为致密,呈典型的层状结构;涂层的主要物相与粉末相同,主要为TiB2和Co两相;经过耐磨损实验发现,涂层具有良好的耐磨损性能.经过60 h熔融铝硅腐蚀后发现,涂层具有良好的耐熔融铝硅腐蚀性能.
参考文献
[1] | 栗卓新,祝弘滨,李辉,孙日超.热喷涂金属陶瓷复合涂层研究进展[J].材料工程,2012(05):93-98. |
[2] | 程汉池,栗卓新,魏琪,李其连,李淑青,史耀武.TiB2纳微米结构喂料的制备研究[J].材料热处理学报,2008(02):140-144. |
[3] | 陈枭,张仁元,李风.TiB2防护涂层的制备及性能[J].涂料工业,2011(07):24-27. |
[4] | Wu Y S;Qiu W Q;Yu H Y et al.Cycle oxidation behavior of nanostructure Ni60-TiB2 composite coating sprayed by HVOF technique[J].Applied Surface Science,2011,257:10224-10232. |
[5] | 张敏;李玉芳;郭建亭 等.机械合金化制备NiA1涂层的研究[J].稀有金属材料与工程,2012,41(02):331-334. |
[6] | O.P. Oladijo;N. Sacks;LA Cornish .Effect of substrate on the 3 body abrasion wear of HVOF WC-17 wt.% Co coatings[J].International Journal of Refractory Metals & Hard Materials,2012(Nov):288-294. |
[7] | Hong, S.;Wu, Y.;Wang, Q.;Ying, G.;Li, G.;Gao, W.;Wang, B.;Guo, W..Microstructure and cavitation-silt erosion behavior of high-velocity oxygen-fuel (HVOF) sprayed Cr_3C_2-NiCr coating[J].Surface & Coatings Technology,2013:85-91. |
[8] | Wu, Y.S.;Zeng, D.C.;Liu, Z.W.;Qiu, W.Q.;Zhong, X.C.;Yu, H.Y.;Li, S.Z. .Microstructure and sliding wear behavior of nanostructured Ni60-TiB_2 composite coating sprayed by HVOF technique[J].Surface & Coatings Technology,2011(6):1102-1108. |
[9] | Jones M.;Shipway PH.;McCartney DG.;Wood JV.;Horlock AJ. .A comparison of the abrasive wear behaviour of HVOF sprayed titanium carbide- and titanium boride-based cermet coatings[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2001(2):1009-1016. |
[10] | Lotfi B;Shipway P H;McCartney D G et al.Abrasive wear behaviour of Ni(Cr)-TiB2 coatings deposited by HVOF spraying of SHS-derived cermet powders[J].WEAR,2003,254:340-349. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%