采用高能球磨法制备了锂离子电池负极材料锂金属氮化物Li3-xMxN(M=Co,Cu等)。制备的锂金属氮化物具有较高的电化学活性和充放电可逆性,可以用作锂离子电池的高容量负极材料。所制备的Li2.6Co0.4N前10次循环的脱嵌锂容量高达880mAh·g-1。Li2.6Co0.2Cu0.2N最初几个循环的脱嵌锂容量为750mAh·g-1,45次充放电循环后的容量保持率为80％。Li2.6Co0.2Fe0.2N是含有Li2.6Co0.4N的两相或多相混合物,40次充放电循环后脱锂容量为560mAh·g-1,相对第二次脱锂容量的保持率为82％。
Lithium (transition) metal nitrides were synthesized by high-energy ball-milling technique. The obtained samples exhibit high electrochemical activity and reversibility.
The average capacity of Li2.6Co0.4N samples is ca. 880mAh·g-1 within the first 10 cycles. Li2.6Co0.2Cu0.2N sample has a capacity about
750mAh·g-1 after the first several cycles. 80% of its second cycle capacity can be retained at the 45th cycle. Li2.6Co0.2Fe0.2N sample
is a mixture of two or more phases including Li2.6Co0.4N. It has a capacity about 560 mAh·g-1 at the 40th cycle, 82% of its second cycle
capacity. Good cycling performance suggests that these compounds could be promising anode materials for lithium ion batteries.
参考文献
| [1] | Nishijima M, Kagohashi T, Imanishi M, et al. Solid State Ionics, 1996, 83: 107--111. [2] Shodai T, Okada S, Tobishima S, et al. Solid State Ionics, 1996, 86: 785--789. [3] Takeda Y, Nishijima M, Yamahata M, et al. Solid State Ionics, 2000, 130: 61--69. [4] Yang J, Takeda Y, Imanishi N, et al. Electrochimica Acta, 2001, 46: 2659--2664. [5] Yang J, Takeda Y, Imanishi N, et al. J. Power Sources, 2001, 97--98: 216--218. [6] Sachsze V W, Juza R. Z. Anorg. Chem., 1949, 259: 278--290. [7] Shodai T, Sakurai Y, Suzuki T. Solid State Ionics, 1999, 122: 85--93. [8] Nishijima M, Kagohashi T, Takeda Y, et al. J. Power Sources, 1997, 68: 510--514. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%