By the sessile drop technique, the wettability of Cu/W systems with the additions of Ni and Cr has been studied under vacuum atmosphere. Effects of Ni and Cr contents and wetting temperatures on the wettability and the wetting mechanisms of copper on W substrate have been investigated in detail. The results show that the wetting angles of Cu on the W substrate are decreased with an increase in the content of Ni or Cr, and also decrease with raising the wetting temperatures. SEM, EPMA, and X-ray diffraction have been used to analyze the interracial characteristics of the CuNi/W and CuCr/W systems. The results reveal that there is a transition layer about 2-3 μm in the interface of Cu-4.0 wt pet Ni/W, in which the intermetallic phase Ni4W is precipitated. As to CuCr/W system, no reaction occurs at the interface. The two factors are that the contents of Cr and Ni and the infiltration temperature must be chosen appropriately in order to control the interfacial dissolution and reaction when the Cu-W alloys are prepared by the infiltration method.
参考文献
| [1] | S.S. Ryu;Y.D. Kim;I.H. Moon .Dilatometric analysis on the sintering behavior of nanocrystalline W-Cu prepared by mechanical alloying[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2002(1/2):233-240. |
| [2] | L Li;Y S Wong;J Y H Fuh;L Lu .[J].Journal of Materials Processing Technology,2001,113:563. |
| [3] | Y Hiraoka;H Hanado;T Inoue .[J].International Journal of Refractory Metals and Hard Materials,2004,22:87. |
| [4] | Y D Kim;N L Oh;S T Oh;I H Moon .[J].Materials Letters,2001,51:420. |
| [5] | A Zulfia;R J Hand .[J].Journal of Materials Science,2002,37(05):955. |
| [6] | N Omura;M Kobashi;T Choh .[J].Journal of the Japan Institute of Metals,2002,66(12):1317. |
| [7] | M Mizumoto;T Murano;A Kagawa .[J].Materials Transactions,2002,43:2629. |
| [8] | G. Rosazza Prin;T. Baffie;M. Jeymond;N. Eustathopoulos .Contact angles and spreading kinetics of Al and Al-Cu alloys on sintered AlN[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2001(1/2):34-43. |
| [9] | Z K Fan;S H Liang;P Xiao .[J].Transactions of Nonferrous Metals Society of China,2001,11(z1):102. |
| [10] | C. Rado;S. Kalogeropoulou;N. Eustathopoulos .Bonding and wetting in non-reactive metal/SiC systems: weak or strong interfaces?[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2000(1/2):195-202. |
| [11] | A Mortensen .[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,1991,135:1. |
| [12] | F A Costa;A G P Silra;U U Gomes .[J].Powder Technology,2003,134:123. |
| [13] | D G Kim;S T Oh;H Jeon;C H Lee and Y D Kima .[J].Journal of Alloys and Compounds,2003,354:239. |
| [14] | Y.-F. Lee;S.-L. Lee;C.-H. Huang .Effects of Fe additive on properties of Si reinforced copper matrix composites fabricated by vacuum infiltration[J].Powder Metallurgy,2001(4):339-343. |
| [15] | J. Hashim;L. Looney;M.S.J. Hashmi .The wettability of SiC particles by molten aluminium alloy[J].Journal of Materials Processing Technology,2001(1/3):324-328. |
| [16] | T B Massalski.Binary Alloy Phase Diagrams[M].American Society for Metals,Metals Park,OH,1990 |
| [17] | S W Yoon;W K Choi;H M Lee .[J].Scripta Materialia,1999,40(03):297. |
| [18] | K.NAKASHIMA;H.MATSUMOTO .EFFECT OF ADDITIONAL ELEMENTS Ni AND Cr ON WETTING CHARACTERISTICS OF LIQUID Cu ON ZIRCONIA CERAMICS[J].Acta materialia,2000(18/19):4677-4681. |
| [19] | C B Lee;S B Jung;Y E Shin;C C Shut .[J].Materials Transactions,2001,42:751. |
| [20] | J J Guo.Alloy Melt and Its Treatment[M].北京:机械工业出版社,2005 |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%