利用Gleeble3500试验机模拟热轧带钢氧化层在不同卷取温度和冷却速度条件下的相变过程,采用激光拉曼光谱区分氧化层中细小析出相和分层组织结构.结果表明:氧化层中FeO在不同卷取温度和冷却速度条件下可形成几种典型的相变组织形态;降低带钢卷取温度和增加卷取后的冷却速度,有利于抑制Fe3O4在FeO层中的析出,提高热轧带钢表面氧化层酸洗去除效果.
参考文献
[1] | Sun W H;Tieu A K;Jiang Z Y et al.High Temperature Oxide Scale Characteristics of Low Carbon Steel in Hot Rlling[J].Journal of Materials Processing Technology,2004,155-156(03):1307. |
[2] | Schroer C;Voss Z;Wedemeyer O;Novotny J;Konys J .Oxidation of steel T91 in flowing lead-bismuth eutectic (LBE) at 550 degrees C[J].Journal of Nuclear Materials: Materials Aspects of Fission and Fusion,2006(1/3):189-197. |
[3] | M.A.Legodi;D.de Waal .The preparation of magnetite,goethite,hematite and maghemite of pigment quality from mill scale iron waste[J].Dyes and Pigments,2007(1):161-168. |
[4] | Chen R Y;Yuen W Y D .Review of the High Temperature Oxidation of Iron and Carbon Steels in Air or Oxygen[J].Oxidation of Metals,2003,59(5/6):433. |
[5] | Faria D L A D;Venancio Silva;Oliveira M T D .Raman Mierospectroscopy of Some Iron Oxides and Oxyhydroxides[J].Journal of Raman Spectroscopy,1997,28(11):873. |
[6] | 王银军,董汉君,穆海玲,陈家光.卷取后的热轧带钢氧化铁皮显微分析[J].中国冶金,2007(10):40-44. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%