运用数值模拟研究方法,研究高拉速厚板坯连铸结晶器流场的影响因素;研究浸入式水口结构、水口控流方式、水口出口角度、水口浸入深度、结晶器宽度、结晶器厚度、吹氩等因素对结晶器流场、液面流速以及初生坯壳的影响.结果表明在高拉速下,结晶器的流场不稳定因素增多,工艺参数对结晶器流场的影响因数增加.在高拉速下结晶器流场流速高,液面波动大,液钢流束冲击深度大,势必造成产品质量的下降趋势,因此高拉速厚板坯连铸过程必须采用电磁制动或流场控制技术,降低高流速带来的不利影响;水口结构与结晶器规格最优化与匹配能得到适宜的结晶器流场;同时发现高拉速钢液流束对结晶器初生坯壳的影响严重,是高拉速漏钢率高的直接原因之一.
参考文献
| [1] | 杉谷 .连铸铸型内不均一凝固に及ぽす拔热速度の影响[J].铁と钢(日本),1981,67(09):102-108. |
| [2] | He Qinglin .Observations of Vortex Formation in the Mould of a Continuous Slab Caster[J].ISIJ International,1993,33(02):343-345. |
| [3] | Brian G. THOMAS;Lifeng ZHANG .Mathematical Modeling of Fluid Flow in Continuous Casting[J].ISIJ International,2001(10):1181-1193. |
| [4] | Kouji TAKATANI;Yoshinori TANIZAWA;Hideo MIZUKAMI .Mathematical Model for Transient Fluid Flow in a Continuous Casting Mold[J].ISIJ International,2001(10):1252-1261. |
| [5] | Brij K. Dhindaw;Tomas Antonsson;Jose Tinoco .Characterization of the Peritectic Reaction in Medium-Alloy Steel through Microsegregation and Heat-of-Transformation Studies[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2004(9):2869-2879. |
| [6] | Thomas B G .Application of Mathematical Models to the Continous Slab Casting Mold[J].Ironmaking and Steelmaking,1989,16(12):53-66. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%