氟金云母玻璃陶瓷材料在切削过程中存在严重的磨损现象.对氟金云母玻璃陶瓷进行了车削加工实验,应用分式析因实验设计研究刀具角度参数对高速钢刀具磨损的影响.通过方差分析,获得刀具角度对刀具磨损的影响显著性及其排序,通过回归分析,建立了刀具磨损量与刀具角度之间的回归方程.研究表明,刀具角度参数对刀具磨损量的影响程度依次为刃倾角,后角,前角,主偏角和副偏角.刀具磨损受到刀具角度间交互作用的影响,其中前角与主偏角、后角和主偏角的交互作用极显著.所建立的回归方程能够较好地描述高速钢刀具磨损量与高速钢刀具角度之间的关系.
参考文献
| [1] | Shengjin Wang;Dechang Jia;Zhihua Yang.Effect of BN content on microstructures, mechanical and dielectric properties of porous BN/Si_3N_4 composite ceramics prepared by gel casting[J].CERAMICS INTERNATIONAL,20134(4):4231-4237. |
| [2] | 章为夷;高宏.可加工陶瓷的结构、性能和制备[J].人工晶体学报,2005(1):169-173. |
| [3] | Mohan Reddy Moola;Alexander Gorin;Khaled Abou Hossein.Optimization of Various Cutting Parameters on the Surface Roughness of the Machinable Glass Ceramic with Two Flute Square End Mills of Micro Grain Solid Carbide[J].International Journal of Precision Engineering and Manufacturing,20129(9):1549-1554. |
| [4] | J. Quinn;L. Su;L. Flanders;I. Lloyd."Edge toughness" and material properties related to the machining of dental ceramics[J].Machining Science and Technology,20002(2):291-304. |
| [5] | Hyunho Shin;Byung-Moo Song.A method to quantify the drilling machinability of machinable ceramics from the viewpoint of preventing chipping[J].CERAMICS INTERNATIONAL,20138(8):9815-9818. |
| [6] | Xiaohui Chen;Lianjie Ma;Chen Li;Xiaobing Cao.Experimental study and genetic algorithm-based optimization of cutting parameters in cutting engineering ceramics[J].The International Journal of Advanced Manufacturing Technology,20145/8(5/8):807-817. |
| [7] | 马廉洁;娄琳;钟利军.氟金云母陶瓷车削加工中刀具磨损的研究[J].中国机械工程,2007(17):2098-2101. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%