以片状的SrTiO3(ST)粉体为模板晶粒,以固相法合成的掺杂Bi2O3的SrTiO3粉体为基体粉料,采用反应模板晶粒生长法(RTGG)结合流延成型工艺制备出SrTiO3织构陶瓷,研究了烧结工艺参数对SrTiO3织构陶瓷显微组织结构和介电性能的影响规律.研究结果表明:SrTiO3织构陶瓷的晶粒沿(100)晶面择优取向生长,陶瓷的织构度随着烧结温度的升高和保温时间的延长而增大,在1550℃下保温16 h的陶瓷试样织构度最大,达到0.56.SrTiO3织构陶瓷的介电常数随着织构度的增加而增大,并呈现出介电各向异性.
参考文献
| [1] | Eiichiro Fukuchi;Toshio Kimura;Toshihiko Tani .Effect of Potassium Concentration on the Grain Orientation in Bismuth Sodium Potassium Titanate[J].Journal of the American Ceramic Society,2002(6):1461-1466. |
| [2] | 王树彬,姚纯,张跃.BNBT无铅压电陶瓷晶粒定向生长[J].人工晶体学报,2007(04):885-888. |
| [3] | Toshihiko TANI .Texture Engineering of Electronic Ceramics by the Reactive-Templated Grain Growth Method[J].日本セラミックス协会学术论文志,2006(1329):363-370. |
| [4] | Messing GL;Trolier-McKinstry S;Sabolsky EM;Duran C;Kwon S;Brahmaroutu B;Park P;Yilmaz H;Rehrig PW;Eitel KB .Templated grain growth of textured piezoelectric ceramics[J].Critical Reviews in Solid State and Materials Sciences,2004(2):45-96. |
| [5] | 刘虎,李月明,沈宗洋,王竹梅,李润润.织构化K0.5Na0.5NbO3无铅压电陶瓷的性能研究[J].人工晶体学报,2011(02):445-449. |
| [6] | 孟凡明,孙兆奇.SrTiO3压敏材料研究进展[J].硅酸盐通报,2006(05):99-102. |
| [7] | Tsuguto Takeuchi;Toshihiko Tani .Texture Development of SrTiO_3 Ceramics during Reactive Templated Grain Growth Processing[J].日本セラミックス协会学术论文志,2002(1280):232-236. |
| [8] | Duran C.;McKinstry S.T. .Fabrication and Electrical Properties of Textured Sr_(0.53)Ba_(0.47)Nb_2O_6 Ceramics by Template Grain Growth[J].Journal of the American Ceramic Society,2000(9):2203-2213. |
| [9] | 李志友,侯俊峰,张晓泳,周科朝.两步熔盐合成技术制备片状SrTiO3晶体[J].材料科学与工程学报,2008(02):165-168,164. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%