以OCr21Ni11SiNRE为对象,研究了该种新型奥氏体耐热不锈钢高温持久性能,分析了持久强度σ与持久寿命τ及Larson-Miller参数P之间的关系,并以此为基础预测了该钢种在750~927℃,103h下的持久强度.结果表明,在本试验条件下,0Cr21Ni11SiNRE的蠕变机制大体相同,其持久强度σ与持久寿命τ的对数,L-M参数P呈线性关系,其中,σ与P之间关系可表示为σ=-20.66×10-3P+589.25(2.33×104
参考文献
[1] | 韩肇俊.可以替代310s和601合金的新型奥氏体耐热不锈钢253MA性能及相近钢种介绍[A].北京,2007 |
[2] | 华杨康;曹程远 .耐热不锈钢253MA性能综述[J].东方锅炉,1996,2:19. |
[3] | 宛农.铬镍型耐热钢-AVESTA253MA[J].冶金译丛,1992(01):64. |
[4] | 张俊善.材料的高温变形与断裂[M].北京:科学出版社,2007 |
[5] | 宛农,谢锡善,徐志超,董建新.金属材料高温持久强度的预测模型[J].理化检验-物理分册,2004(08):398-401. |
[6] | M. SHIGA;K. HIDAKA;S. NAKAMURA .Development of 12 percent CrNb steel for heavy duty gas turbine discs[J].ISIJ International,1995(11):1400-1406. |
[7] | Bartsch H .A New Equation for Ferritic and Martensitic Steels[J].Steel Research International,1995,66(09):384. |
[8] | Peterseim J;Sauthoff G .The Effect of Fine Precipitate Particles on the Creep Behavior of Ferritic Model Steel Ⅲ.Model Calculations[J].Steel Research International,1986,57(12):77. |
[9] | Spigarelli S;Kloc L;Bontempi P et al.Analysis if Creep Curves in a 9Cr-1Mo Modified Steel by Means of Simple Constitutive Equations[J].Scripta Materialia,1997,37(04):399. |
[10] | Stefan Straub;Thomas Hennige;Peter Polcik .Microstructure and deformation rate during long-term cyclic creep of the Martensitic steel X22CrMoV 12-1[J].Steel Research,1995(9):394-401. |
[11] | 杨瑞成,郑丽平,王晖,姚继辉,李贵智,移建永.珠光体耐热钢高温时效后基体力学性能的变化[J].钢铁研究学报,2002(06):40-44. |
[12] | Manabu TAMURA;Hisao ESAKA;Kei SHINOZUKA .Stress and Temperature Dependence of Time to Rupture of Heat Resisting Steels[J].ISIJ International,1999(4):380-387. |
[13] | 章燕谋.锅炉与压力容器用钢[M].西安:西安交通大学出版社,1981 |
[14] | Baldan A. .Effect of stress on the creep deformation and fracture behavior of a high-temperature alloy[J].Journal of Materials Science Letters,1998(18):1549-1552. |
[15] | Radhakrishnan V M .Rupture Life of Materials Obeying Exponential and Power Law Creep[J].Transactions of the Iron and Steel Institute of Japan,1986,26:829. |
[16] | Thelning K E.Steel and Its Heat Treatment[M].London:butterworth,1984 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%