针对连铸过程的结晶器液面控制问题,提出了基于最小二乘支持向量机技术的预测模型的预测控制方法.利用最小二乘支持向量机对非线性过程建立预测模型,采用非线性预测控制方法进行控制.以结晶器液面控制过程为控制对象进行仿真,仿真结果表明,最小二乘支持向量机的建模方法可以有效地建立预测模型并且具有较好的泛化能力,基于这种预测模型的预测控制具有很好的控制性能.
参考文献
| [1] | Bedi J S;Kueon Y S;Kim Y.Fuzzy Sliding Mode Mould Level Control in Continuous Casting Process[A].Seoul:Society of Fuzzy System,1999:1376-1381. |
| [2] | Kong F;De Keyzer R;Martien C.Model Identification for the Mould Level Control Loop in a Continuous Casting Machine[A].Beijing:The Chinese Society for Metals,1992:107-112. |
| [3] | Barrón M A;Aguilar R;González J et al.Model-Based Control of Mold Level in a Continuous Steel Caster Under Model Uncertainties[J].Control Engineering Practice,1998,6(02):191-196. |
| [4] | Dussud M.;Galichet S. .Application of fuzzy logic control for continuous casting mold level control[J].IEEE transactions on control systems technology: A publication of the IEEE Control Systems Society,1998(2):246-256. |
| [5] | M. G. Joo;Y. H. Kim;T. Kang .Stable adaptive fuzzy control of the molten steel level in the strip casting process[J].IEE proceedings.Control theory and applications,2002(5):357-364. |
| [6] | Graebe S.F.;Goodwin G.C. .Control design and implementation in continuous steel casting[J].IEEE Control Systems Magazine,1995(4):64-71. |
| [7] | 王朝利,阳思聪,朱发俊.预测控制在连铸结晶器液位控制中的应用研究[J].控制与决策,2001(02):211-214. |
| [8] | 郭戈,王伟,柴天佑.连铸结晶器液位预测控制[J].控制理论与应用,2001(05):714-716,721. |
| [9] | 薛凌.薄板坯连铸连轧技术的进展[J].北京科技大学学报,2003(03):207-210. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%