欢迎登录材料期刊网

材料期刊网

高级检索

固体可燃物热解过程中,热流是一个重要的影响因素。本文设计了线性及平方上升两种热流,实验研究了无点火源条件下榆木及PMMA的热解着火特性,测量了着火时间、表面温度及质量损失的变化规律。结果表明,随着热流上升系数增加,着火时间均减小,榆木着火时刻的表面温度增加,PMMA基本不变,质量损失速率均增大。热流上升系数和着火时间符合较好的幂函数关系。相同热流下,着火时刻PMMA的质量损失远小于榆木的质量损失。

Heat flux has an important effect on the pyrolysis of solid fuels.We designed two kinds of variable heat flux,linearly and quadratically rising heat flux.Experimental studies of ignition time, surface temperature and mass loss were conducted on the non-piloted ignition of elm and PMMA exposed to these two kinds.It indicates that with the increase of the rate of heat flux,ignition time decreases,the surface temperature of elm on the ignition time increases,while PMMA is almost the same,mass loss rate increases.The relation between the ignition time and the rate of increase of heat flux was found to follow a power function.Under the same variable heat flux,mass loss of PMMA is far less than that of elm at ignition time.

参考文献

[1] 杨立中,郭再富.变热流条件下木材点燃时间与热流变化率关系的实验研究[J].热科学与技术,2005(03):224-227.
[2] 季经纬 .变热流条件下木材点燃判据及应用研究[D].中国科学技术大学,2003.
[3] Yang Lizhong;Deng Zhihua;Fan Weicheng .Experimental study on Characteristics at Early stage Of Fire-Measurement and Analysis on Early development Of Flame image area[J].Journal of fire sciences,2001(3):190-203.
[4] Yang Lizhong;Guo Zaifu;Zhou Yupeng;Fan Weicheng .The influence of different external heating ways on pyrolysis and spontaneous ignition of some woods[J].Journal of Analytical & Applied Pyrolysis,2007(1):40-45.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%