镁、铝合金表面自纳米化研究现状

材料导报, 2011, 25(23): 20-24.

镁、铝合金表面自纳米化研究现状

康燕平 ^1, , 李元东 ^2, , 王晓东 ^3, , 高坤 ^4,

1.兰州理工大学甘肃省有色金属新材料省部共建国家重点实验室,兰州730050

2.兰州理工大学甘肃省有色金属新材料省部共建国家重点实验室,兰州730050;兰州理工大学有色金属合金省部共建教育部重点实验室,兰州730050

3.兰州理工大学甘肃省有色金属新材料省部共建国家重点实验室,兰州730050

4.兰州理工大学甘肃省有色金属新材料省部共建国家重点实验室,兰州730050

关键词：表面自纳米化 , 镁合金 , 铝合金 , 制备

Research Present of Surface Self-Nanocrystallization on Magnesium, Aluminum Alloy

综述了目前镁、铝合金表面自纳米化制备方法、性能、耐蚀性等方面的研究.材料经表面自纳米化后,表面纳米层有良好的热稳定性,表面硬度明显提高,不同的工艺对耐蚀性影响不同.提出了表面自纳米化技术研究还需解决的问题及趋势.

参考文献

[1]	Lu K;Lu J .Surface nanocrystallization (SNC) of metallic materials-presentation of the concept behind a new approach[J].Materials Science and Technology,1999,15:193.
[2]	Wang Z B;Tao N R;Tong W P et al.Diffusion of Cr in nanostructured Fe and low carbon steel produced by means of surface mechanical attrition treatment[J].Defect and Diffusion Forum,2006,249:147.
[3]	杨晓华,兑卫真,刘刚.表面机械研磨处理对316L不锈钢组织和性能的影响[J].材料热处理学报,2007(02):118-121.
[4]	Roland T;Retraint D;Lu K;Lu J .Fatigue life improvement through surface nanostructuring of stainless steel by means of surface mechanical attrition treatment[J].Scripta materialia,2006(11):1949-1954.
[5]	K. Wang;N.R. Tao;G. Liu .Plastic strain-Induced grain refinement at the nanometer scale in copper[J].Acta materialia,2006(19):5281-5291.
[6]	K.Y. Zhu;A. Vassel;F. Brisset .Nanostructure formation mechanism of alpha-titanium using SMAT[J].Acta materialia,2004(14):4101-4110.
[7]	曹荣 .Ti6Al4V表面纳米化及离子注入特性研究[D].南京理工大学,2006.
[8]	Sun HQ;Shi YN;Zhang MX;Lu K .Surface alloying of an Mg alloy subjected to surface mechanical attrition treatment[J].Surface & Coatings Technology,2008(16):3947-3953.
[9]	刘宝胜 .镁合金表面纳米化显微结构和晶粒细化机理研究[D].太原理工大学,2007.
[10]	Wu X;Tao N;Hong Y et al.Microstructure and evolution of mechanically-induced ultrafine grain in surface layer of Alalloy subjected to USSP[J].Acta Materialia,2002,50:2075.
[11]	胡兰青,李茂林,王科,刘刚,卫英慧,许并社.铝合金表面纳米化处理及显微结构特征[J].中国有色金属学报,2004(12):2016-2020.
[12]	高家诚,王强,高正源.机械研磨金属表面纳米化的研究进展[J].功能材料,2010(05):741-745,750.
[13]	胡兰青 .金属纳米晶化及机理研究[D].太原理工大学,2005.
[14]	李茂林 .铝合金表面纳米化微观结构及晶粒细化机制研究[D].太原理工大学,2006.
[15]	Lu K;Hansen N .Structure refinement and deformation mechanisms in nanostructured metals[J].Scripta Materialia,2009,60:1033.
[16]	张洪旺,刘刚,黑祖昆,吕坚,卢柯.表面机械研磨诱导AISI 304不锈钢表层纳米化Ⅱ.晶粒细化机理[J].金属学报,2003(04):347-350.
[17]	Nairong Tao;Hongwang Zhang;Jian Lu;Ke Lu .Development of Nanostructures in Metallic Materials with Low Stacking Fault Energies During Surface Mechanical Attrition Treatment (SMAT)[J].Materials transactions,2003(10):1919-1925.
[18]	樊新民,叶惠琼.7A04表面纳米化组织的热稳定性[J].材料热处理学报,2007(z1):267-270.
[19]	麦永津,揭晓华,刘莉莉,于能,郑向新.7050铝合金表面纳米晶层的热稳定性研究[J].金属热处理,2009(10):5-8.
[20]	李娜 .AZ91镁合金表面固态扩渗的研究[D].西北工业大学,2007.
[21]	Wang ZB.;Tao NR.;Li S.;Wang W.;Liu G.;Luc J.;Lu K. .Effect of surface nanocrystallization on friction and wear properties in low carbon steel[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):144-149.
[22]	X.L. Wu;N.R. Tao;Q.M. Wei .Microstructural evolution and formation of nanocrystalline intermetallic compound during surface mechanical attrition treatment of cobalt[J].Acta materialia,2007(17):5768-5779.
[23]	唐锋林 .表面纳米化处理对铝镁合金综合性能的影响[D].广西大学,2008.
[24]	王天生,于金库,董冰峰,张福成.1Cr18Ni9Ti不锈钢的喷丸表面纳米化及其对耐蚀性的影响[J].机械工程学报,2005(09):51-54.
[25]	侯利锋,卫英慧,刘宝胜,许并社.AZ31B镁合金表面纳米化处理后的显微结构特征[J].材料热处理学报,2007(z1):214-217.
[26]	邹途祥,卫英慧,侯利锋,许并社,刘刚.纯铝表面机械研磨纳米化后的显微组织和硬度[J].机械工程材料,2009(01):40-43.
[27]	Liu G;Lu J;Wang S C .Low carbon steel with nanosrtuctured surface layer induced by high-energy shot peening[J].Scripta Materialia,2001,44(8-9):1791.
[28]	孙彩云,武晓雷,洪友士.表面纳米化Zr的拉伸性能[J].材料热处理学报,2005(03):73-75.
[29]	Zhang Y S;Han Z;Wang K et al.Friction and wear behaviors of nanocrystalline surface layer of pure copper[J].WEAR,2006,260:942948.
[30]	Sun HQ;Shi YN;Zhang MX .Wear behaviour of AZ91D magnesium alloy with a nanocrystalline surface layer[J].Surface & Coatings Technology,2008(13):2859-2864.
[31]	谭谆礼 .金属材料高能喷丸表面纳米化研究[D].大连铁道学院,2002.
[32]	段晓鸽,赵西成,张聪慧,兰新哲,何晓梅.表面机械研磨处理后Zr-4合金的组织与性能[J].机械工程材料,2009(04):89-92.
[33]	Lu K;Lu J .Nanostructured surface layer on metallic materials induced by surface mechanical attrition treatment[J].Materials Science and Engineering,2004,A375-377:38.
[34]	N. R. Tao;Z. B. Wang;W. P. Tong;M. L. Sui;J. Lu;K. Lu .An investigation of surface nanocrystallization mechanism in Fe induced by surface mechanical attrition treatment[J].Acta materialia,2002(18):4603-4616.
[35]	Lu J .Proeeeding of the 4th international conference on residua-stresses[R].Baltimore,1994.
[36]	熊天英;李铁藩;吴杰 .超声速微粒轰击金属材料表面纳米化方法[P].CN 01128225.8,2001-09-29.
[37]	侯利锋,卫英慧,刘宝胜,许并社.AZ91D镁合金表面机械研磨处理后显微结构研究[J].稀有金属材料与工程,2008(03):530-533.
[38]	康燕平,李元东,陈体军,王晓东,高坤.表面纳米化工艺对半固态成形AZ91D镁合金显微组织的影响[J].中国表面工程,2011(03):43-48.
[39]	潘金生;仝健民;田民波.材料科学基础[M].北京:清华大学出版社,1998:281.
[40]	H.Q. Sun;Y.-N. Shi;M.-X. Zhang .Plastic strain-induced grain refinement in the nanometer scale in a Mg alloy[J].Acta materialia,2007(3):975-982.
[41]	李茂林.表面机械研磨铝锂合金微观结构及性能变化[J].新技术新工艺,2007(06):82-83.
[42]	何静 .7A52超硬铝合金焊接接头表面纳米化的试验研究[D].内蒙古工业大学,2009.
[43]	Kim S H;Aust K T .A comparison of the corrosion behavior of polycrystalline and nanocrystalline cobalt[J].Scripta Materialia,2003,48(09):1379.
[44]	Kh.M.S. Youssef;C.C. Koch;P.S. Fedkiw .Improved corrosion behavior of nanocrystalline zinc produced by pulse-current electrodeposition[J].Corrosion Science,2004(1):51-64.
[45]	黄贞益,刘广华,吴胜,王光鹏.08AL表面纳米化处理的研究及应用[J].中国科技成果,2006(21):33-35.
[46]	Shewrnon P G.Transformation in metals:Mc Graw-hill Book Co[M].New York,1969:116.
[47]	JIANSHE LIAN;RUSLAN Z. VALIEV;BERNARD BAUDELET .ON THE ENHANCED GRAIN GROWTH IN ULTRAFINE GRAINED METALS[J].Acta Metallurgica et Materialia,1995(11):4165-4170.
[48]	K. LU;Z. F. DONG;I. BAKONYI;A. CZIRAKI .THERMAL STABILITY AND GRAIN GROWTH OF A MELT-SPUN HfNi_5 NANOPHASE ALLOY[J].Acta Metallurgica et Materialia,1995(7):2641-2647.
[49]	张立德;解思深.纳米材料和纳米结构[M].北京:化学工业出版社,2005:337.

上一张下一张

计量

下载量()
访问量()

作者相关

文章评分

您的评分：
1

0%
2

0%
3

0%
4

0%
5

0%

材料期刊网

镁、铝合金表面自纳米化研究现状

Research Present of Surface Self-Nanocrystallization on Magnesium, Aluminum Alloy

参考文献