采用快速冷凝粉末包套挤压工艺制备了含 铁量分别为1.2%和3 .5%的Al-11%Si-Fe合金。 研究了这两合金在挤压和退火状态下的微观组织特征和内耗行 为 , 解释了Fe含量及其析出相、 热处理状态等对内耗的影响, 提出了该合金系在60~25 0 ℃温度范围产生内耗峰的机制。
Al-11Si-1.2Fe and Al-11Si-3.5Fe alloys were experim entally made with rapid solidification-powder extrusion technology. The interna l friction and the microstructure of the alloys under extruted and isothermal ann ealing conditions were investigated. An internal friction peak was observed in the temperature range 60~250 ℃ in the present alloys. The Q -1 peak dec reases with the increase of iron, which was found to be directly attributed to t he precipitation of FeAl2 and Al-Si-Fe intermetallics from the aluminium all o y matrix. The internal friction mechanisms of the alloy were put forward.
参考文献
[1] | Zhou J;Duszczyk J;Korevaar B.Microstructural features and f inal mechanical properties of the iron-modified Al-20Si-3Cu-1Mg alloy produc t processed from atomized powder[J].Journal of Materials Science,1991(26):3041. |
[2] | 李月珠.快速凝固技术和材料[M].北京:冶金工业出版社,1993:22. |
[3] | 陈振华,张豪,刘秋林,陈刚,孙章明,杨伏良.多层喷射共沉积法制备6066铝合金/SiC颗粒复合材料[J].中国有色金属学报,1996(04):83-86. |
[4] | 郭鸿镇,姚泽坤,花田修治,吉见享袺.快速凝固Nb3Al-Nb固溶体再相合金的组织与性能[J].中国有色金属学报,1998(03):472-476. |
[5] | 袁晓光;徐达鸣 .喷射沉积Al-Si-Fe-Cu -Mg合金组织与力学性能[J].金属学报,1997,33(03):248-252. |
[6] | Fabietti L M;Sekhar J A .Planar to equiaxed transition in the presenc e of an external wetting surface[J].Metallurgical and Materials Transactions,1992,23:3361. |
[7] | Nowick A S;Berry B S.Anelastic Relaxation in Crystalline solids[M].New York:Academic Press,1972:435. |
[8] | 冯端;王业宁;丘第荣.Metal Physics B(金属物理B)[M].北京:科学出版社,1975:557. |
- 下载量()
- 访问量()
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%